ISO 697:1981 PDF

Name: ISO 697:1981 — Surface active agents — Washing powders — Determination of apparent density — Method by measuring the mass of a given volume
SKU: ISO 697:1981
Price: 25 EUR
Availability: InStock

Surface active agents — Washing powders — Determination of apparent density — Method by measuring the mass of a given volume

Название (английский):

ISO 697:1981

Surface active agents — Washing powders — Determination of apparent density — Method by measuring the mass of a given volume

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 1 марта 1981 г.
Издание:: ISO IS 697 edition 2 version 1
ICS:: 71.100.40

Тип поставки:

Full version45 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:45 €

Описание (английский):

The method consists in determining the mass of powder in receiver of known dimensions, after filling with the sample from a funnel of specified shape under specified conditions. The method is applicable to free flowing powders and, provided that an appropriate funnel is used, to powders which have a tendency to cake. In the case of powder containing lumps, the method is applicable only if these can be disintegrated readily without braeking down the particles of the powder.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 697:1981 specifies a standardized laboratory method for determining the apparent density (bulk density) of washing powders and similar powdered surfactants by measuring the mass that fills a known volume. The method produces a conventional, reproducible value for quality control and material specification. It applies to free‑flowing powders and, with an appropriate funnel, to powders that tend to cake. Powders with lumps may be tested only if lumps can be readily disintegrated without breaking particles.

Key topics and technical requirements

Apparatus

Funnel with smooth, non‑electrifying surfaces; orifice 40 mm for free‑flowing powders or 60 mm for caking powders.
Receiver of nominal 500 ml capacity (calibrated and adjustable to 500 ± 0.5 ml).
Stand to hold funnel and receiver in fixed alignment, closure plate (110 × 70 mm), straightedge (~150 mm) and a glass plate (100 × 100 × 7 mm).

Receiver calibration

Calibrate by weighing the empty receiver, filling with recently boiled distilled water at 20 °C (using the glass plate to set the volume), and weighing again to establish the receiver volume.

Test procedure

Fill funnel with test sample, quickly remove closure plate so powder fills and overflows into calibrated receiver.
Level the surface with a straightedge, clean exterior, and weigh receiver + sample to 0.1 g accuracy.
Perform at least two determinations on different portions of the laboratory sample.

Calculation and reporting

Apparent density = (mass of powder in receiver) ÷ (calibrated receiver volume) → expressed as g/ml, reported to three significant figures.
Repeatability: the two successive results by the same analyst must not differ by more than 5% of the mean.
Test report should record sample ID, presence of lumps, funnel orifice used (40 or 60 mm), results and any deviations.

Practical applications and users

Quality control laboratories in detergent and surfactant manufacturing for batch release and specification checks.

Product development and formulation teams assessing flowability, dosing performance and packing behavior of washing powders.

Packaging engineers and logistics planners estimating bulk handling, storage volume and transport weight.

Independent test labs, standards bodies and regulatory agencies requiring reproducible bulk density data for compliance and comparison.

Related standards

ISO 607 - Surface active agents and detergents: methods of sample division (sampling and sample preparation referenced by ISO 697).

ISO 3424 - Determination of bulk density for related powdered materials (apparatus and technique overlap).

Keywords: ISO 697, apparent density, bulk density, washing powders, surfactants, measurement method, funnel orifice, receiver calibration, detergent quality control.

ISO 697:1981 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

SIST EN ISO 6076:2023

Adhesives - Installation of floor coverings, wood flooring, levelling compounds and tiles - Specification of…

SIST EN ISO 6974-3:2019

Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 3: Precisi…

ISO 3424:1975

Sodium perborates for industrial use — Determination of bulk density