ISO 7368:2016 PDF

Name: ISO 7368:2016 — Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
SKU: ISO 7368:2016
Price: 25 EUR
Availability: InStock

Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities

Название (английский):

ISO 7368:2016

Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 41
Дата публикации:: 28 июля 2016 г.
Издание:: ISO IS 7368 edition 2 version 1
ICS:: 23.100.50

Тип поставки:

Full version615 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:7 раб. дн. (перевод)

Цена:615 €

Описание (английский):

ISO 7368:2016 specifies only geometrical data relating to cavities in which two-port hydraulic slip-in cartridge valves are mounted in order to ensure interchangeability. NOTE For example, this document does not specify rated pressures. It applies to cavities for two-port hydraulic slip-in cartridge valves which are generally applicable to industrial equipment.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 7368:2016 - "Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities" defines the geometrical requirements for cavities in which two‑port slip‑in hydraulic cartridge valves are mounted. The standard is strictly about dimensions, tolerances and surface requirements to ensure interchangeability of cartridge valves used in industrial hydraulic equipment. It does not specify performance parameters such as rated pressures.

Key topics and technical requirements

Scope: Geometry-only requirements for cavities used with two‑port slip‑in cartridge valves (sizes include 06–16; sizes 15 and 16 were added in this edition).

Dimensions and drawings: Detailed cavity layouts, figures and tables cover multiple nominal port diameters and configurations (including main system pressure‑relief valve variants).

Tolerances:

Positional tolerances for pin holes, screw holes and port holes: ±0.2 mm along x, y and z axes.
General dimensional tolerances in accordance with ISO 2768‑1.
Surface flatness requirement for sealing areas: 0.01 mm over 100 mm (see ISO 3601‑2).

Surface finish:

Surface roughness values (Rz) specified for sealing/chamfer areas; unspecified finishes default to Rz 63 µm.
Surface texture indications referenced to ISO 1302 and ISO 4287.

Sealing and O‑ring housings: Surface and dimensional alignment with ISO 3601‑2 for O‑ring housing dimensions.

Thread and screw guidance:

Minimum thread depth: 1.8 × screw diameter (D); recommended full thread depth 2•D + 6 mm.
Recommended engagement for ferrous mounting: 1.25 • D.

Identification statement: Standard provides an approved compliance statement for use in test reports, catalogues and sales literature.

Practical applications - who uses ISO 7368:2016

Hydraulic valve manufacturers designing two‑port slip‑in cartridge valves to be interchangeable with industry-standard cavities.

Manifold and hydraulic manifold block designers engineering cavity layouts and port locations.

OEMs and machine builders integrating cartridge valves into industrial equipment where consistent mounting geometry and sealing are required.

Maintenance engineers and procurement teams verifying replacement valve compatibility and specifying cavity machining tolerances.

Technical writers and catalog authors using the prescribed identification statement for conformity claims.

Related standards

ISO 3601‑2 - O‑rings: housing dimensions for general applications

ISO 1302, ISO 4287 - Surface texture specifications

ISO 2768‑1 - General tolerances

ISO 5598 - Fluid power terminology

ISO 5783 - Code system for valve sizing (note: sizes 15 and 16 added in ISO 7368 are not yet listed in ISO 5783)

Keywords: ISO 7368:2016, hydraulic fluid power, two‑port slip‑in cartridge valves, cavities, interchangeability, manifold design, O‑rings, surface roughness, dimensional tolerances.

ISO 7368:2016 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications - who uses ISO 7368:2016

Benefits

Related standards

Технические детали

SIST ISO 2768-1:1999

General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indic…

ISO 3601-2:2008

Fluid power systems — O-rings — Part 2: Housing dimensions for general applications

ISO 1302:1992

Technical drawings — Method of indicating surface texture

ISO 4287:1997/Amd 1:2009

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface t…

ISO 5598:1985

Fluid power systems and components — Vocabulary

ISO 5783:1981

Hydraulic fluid power — Code for identification of valve mounting surfaces

SIST ISO 7368:2021

Hydraulic fluid power -- Two-port slip-in cartridge valves -- Cavities