ISO 7507-5:2000 PDF

Name: ISO 7507-5:2000 — Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 5: External electro-optical distance-ranging method
SKU: ISO 7507-5:2000
Price: 25 EUR
Availability: InStock

Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 5: External electro-optical distance-ranging method

Название (английский):

ISO 7507-5:2000

Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 5: External electro-optical distance-ranging method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 16
Дата публикации:: 6 июля 2000 г.
Издание:: ISO IS 7507 edition 1 version 1
ICS:: 75.180.30

Тип поставки:

Full version240 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:240 €

Описание (английский):

This part of ISO 7507 specifies a method for the calibration of non-insulated vertical cylindrical tanks having diameters greater than 5 m, by means of external measurement using an electro-optical distance-ranging method (EODR), and for the subsequent compilation of tank capacity tables. This part of ISO 7507 is applicable to tanks with cone-up or cone-down bottoms as well as to tanks with flat bottoms.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 7507-5:2000 specifies an external electro‑optical distance‑ranging (EODR) method for the calibration of non‑insulated vertical cylindrical storage tanks used for petroleum and liquid petroleum products. It covers external measurement procedures for tanks with diameters greater than 5 m (including cone‑up, cone‑down and flat bottoms) and describes how to derive 3‑D coordinates, circumferences at vertical levels and the subsequent tank capacity tables.

Key topics and technical requirements

Scope and applicability: External EODR calibration for vertical cylindrical tanks > 5 m diameter; produces capacity tables for volumetric measurement and inventory control.

Measurement principle: Use of external stations to obtain angular and slope‑distance data to tank top, bottom and tangential points; computation of 3‑D coordinates and circumferences to create capacity tables compatible with ISO 7507-1 procedures.

Number of stations: Determined from tank nominal circumference C by N = C / 8, rounded up to the nearest even number. Minimum 8 stations; typical upper limit 36 (more if tank deformation requires it).

Targeting and points: Tangent measurements on each course (two per set: near lower seam and near upper seam), plus top/bottom bisects on top and bottom courses. Additional points recommended for deformed shells.

Equipment: EODR instrument (angular and distance units), single‑corner prisms on holders, tribrachs (min. 5), tripods (min. 5), ranging pole, retro‑reflective tape, paint and plate thickness meters; bottom calibration equipment per ISO 7507‑1 Annex C.

Calibration controls & verification: Instrument verification per manufacturer and ISO 7507‑4 guidance; ensure measurement uncertainty stays within required limits.

Precautions and safety: Laser class must conform to IEC 60825‑1 (Class 1 or 2). Electrical equipment must meet area classification (IEC 60079‑10). Tanks must have been filled at least once with equal/greater density liquid; if calibrated with liquid on board, contents must be static and temperature/density/dip recorded. If wall temperature differs by >10 °C between empty and full parts, tank must be entirely full or empty.

Practical applications

Producing accurate tank calibration and capacity tables for inventory management, accounting and custody transfer.

Non‑intrusive field calibration where internal access is limited or hazardous.

Periodic verification of tank geometry after repairs, settlement or deformation.

Use in terminal operations, refineries, storage depots and metrology services.

Related standards

ISO 7507 series (Parts 1–4, 6) - other tank calibration methods (strapping, optical methods, internal EODR, monitoring)

ISO 4269‑1, ISO 8311, ISO 9091 (related tank calibration and measurement standards)

IEC 60825‑1 (laser safety), IEC 60079‑10 (hazardous area classification)

Keywords: tank calibration, EODR, electro‑optical distance‑ranging, vertical cylindrical tanks, capacity tables, petroleum storage tanks, ISO 7507-5.

ISO 7507-5:2000 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications

Who should use it

Related standards

Технические детали

SIST ISO 7507-1:2006

Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 1: Strapping met…

SIST ISO 7507-4:2010

Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 4: Internal electr…

BS EN IEC 60825-12:2019

Safety of laser products - Safety of free space optical communication systems used for transmission of inform…

IEC 60079-10-1:2015/COR1:2015

Corrigendum 1 - Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

SIST ISO 7507-2:2023

Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 2: Optical-referen…

SIST EN ISO 8311:2014

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Calibration of membrane tanks and…

ISO 9091-2:1992

Refrigerated light hydrocarbon fluids — Calibration of spherical tanks in ships — Part 2: Triangulation measu…