ISO 7509:2015 PDF

Name: ISO 7509:2015 — Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
SKU: ISO 7509:2015
Price: 25 EUR
Availability: InStock

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure

Название (английский):

ISO 7509:2015

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 4 марта 2015 г.
Издание:: ISO IS 7509 edition 2 version 1
ICS:: 23.040.20

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

ISO 7509:2015 specifies a method for determining the time-to-failure of glass-reinforced thermosetting plastics (GRP) pipes under internal hydrostatic pressure at a specified temperature. The external environment can be air or water. NOTE For other internal or external environments, the referring standard is to specify any additional requirement.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 7509:2015 specifies a laboratory method for determining the time-to-failure of glass-reinforced thermosetting plastics (GRP) pipes under sustained internal hydrostatic pressure at a defined temperature. The method applies when the external environment is air or water and is intended to generate data for long‑term pressure resistance of GRP piping systems. Typical outputs are time-to-failure results used to assess material performance, quality control, and design validation.

Key Topics and Requirements

Scope and principle: Measures failure time for GRP pipes subjected to a constant internal hydrostatic pressure at a specified temperature; results vary with end‑loading conditions and external environment.

Failure modes defined:

Bursting - rupture with immediate loss of liquid and pressure drop.
Leaking - visible liquid loss or continuous pressure drop.
Weeping - slow passage of liquid detectable visually or electronically.

Apparatus and accuracy:

Dimensional measurements accurate to ±1.0 %.
Pressure measuring device accurate to ±1.0 % of test pressure.
Optional strain gauges accurate to ±2 %.
Optional electrical resistance detection capable of sensing ≤ 3 MΩ between test liquid and an external conductive layer.

Specimen preparation and conditioning: Full-length pipe section with smooth, perpendicular ends; condition at test temperature for 24 h prior to testing.

Test procedure highlights:

Fill specimen (water or test liquid), avoid air entrapment.
Raise pressure to target within 5 min and maintain until failure.
Record test duration with an accuracy of ±2 % (or ±24 h for long tests).
Interruptions under 100 h may be allowed and must be recorded and deducted.

Detection and reporting: Visual, pressure-loss, or electronic detection per the standard. The standard requires documented test reports including specimen ID, dimensions, environment, pressure, state of stress (end thrust), strain data (if measured), and time‑to‑failure.

Applications and Who Uses It

ISO 7509:2015 is used by:

GRP pipe manufacturers for product development and quality control.

Independent testing laboratories performing long‑term pressure tests.

Design and materials engineers validating service life and safety margins.

Certification bodies and standards committees assessing compliance. Practical uses include material selection, verifying design pressure ratings, producing long‑term resistance data for life‑prediction (used with regression analysis), and supporting type approval and product certification.

Related Standards

ISO 10928 - methods for regression analysis and establishing long‑term time‑to‑failure relationships (commonly used with ISO 7509 data).

ISO 3126 - dimensional measurement procedures for plastics piping components.

Keywords: ISO 7509:2015, GRP pipes, glass‑reinforced thermosetting plastics, time‑to‑failure, hydrostatic pressure test, sustained internal pressure, pressure testing, failure detection.

ISO 7509:2015 PDF

Abstract

Похожие стандарты

Overview

Key Topics and Requirements

Applications and Who Uses It

Related Standards

Технические детали

SIST EN ISO 10928:2025

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regr…

ISO 7509:2000

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to fail…

SIST EN ISO 3126:2005

Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)