ISO 7530-9:1993 PDF

Name: ISO 7530-9:1993 — Nickel alloys — Flame atomic absorption spectrometric analysis — Part 9: Determination of vanadium content
SKU: ISO 7530-9:1993
Price: 25 EUR
Availability: InStock

Nickel alloys — Flame atomic absorption spectrometric analysis — Part 9: Determination of vanadium content

Название (английский):

ISO 7530-9:1993

Nickel alloys — Flame atomic absorption spectrometric analysis — Part 9: Determination of vanadium content

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 19 августа 1993 г.
Издание:: ISO IS 7530 edition 1 version 1
ICS:: 77.120.40

Тип поставки:

Full version45 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:45 €

Описание (английский):

The principle of the method specified is dissolving a test portion in acid, aspiring the test solution into a nitrous oxide-acetylene flame of an atomic absorption spectrometer, measuring the absorbance of the resonance line energy from the spectrum of vanadium and comparison with that of calibration solutions at a wavelength of 318,4 nm. The method may be used to determine vanadium contents in the range of 0,05 % (m/m) to 1 % (m/m).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 7530-9:1993 is an international standard developed by the International Organization for Standardization (ISO) that specifies a flame atomic absorption spectrometric method for determining vanadium content in nickel alloys. The procedure outlined in this document allows for accurate analysis of vanadium within the range of 0.05% (m/m) to 1% (m/m). The standard is part of the ISO 7530 series, which addresses the flame atomic absorption spectrometric analysis of various elements in nickel alloys, ensuring consistency and reliability in chemical analysis across industries.

Key Topics

Nickel Alloys Analysis: This part focuses on determining vanadium, an element that significantly affects the properties of nickel-based materials.

Flame Atomic Absorption Spectrometry (FAAS): The method involves dissolving a sample in acid, introducing it into a nitrous oxide-acetylene flame, and measuring the absorbance specific to vanadium at a wavelength of 318.4 nm.

Calibration and Accuracy: The standard describes the preparation of calibration solutions and reagent blanks to ensure result accuracy, referencing the use of vanadium standard solutions and strontium chloride as a matrix modifier.

Applicability Range: The method is suitable for vanadium concentrations from 0.05% to 1% (mass fraction), supporting applications in a wide range of nickel alloy compositions.

Quality and Reproducibility: Guidance is provided on ensuring repeatability and reproducibility, referencing ISO 5725 for statistical treatment of laboratory results.

Applications

ISO 7530-9:1993 is essential for:

Metallurgical Quality Control: Used extensively in laboratories for the precise measurement of vanadium during the production of nickel alloys, helping manufacturers maintain desired material characteristics.

Aerospace and Power Generation: Nickel alloys with controlled vanadium content are critical in environments demanding high strength and resistance to heat and corrosion, such as turbine engines and power plants.

Accredited Analytical Testing: Laboratories performing compliance testing and certification of nickel alloys use this standard to provide trusted analytical results.

Research and Development: Facilitates the development of new nickel alloys by allowing accurate monitoring and adjustment of vanadium levels during alloy formulation.

Material Certification: Supports producers and users in providing documentation and certification of vanadium content per international requirements.

Related Standards

ISO 7530-1:1990 - General requirements and sample dissolution procedures for nickel alloy analysis.

ISO 7530-2 to ISO 7530-8 - Methods for determining cobalt, chromium, copper, iron, manganese, aluminium, and silicon contents in nickel alloys using flame atomic absorption spectrometry.

ISO 5725:1986 - Guidance on the precision and accuracy of test methods, used for validating analytical results in inter-laboratory settings.

Practical Value

By following ISO 7530-9:1993, laboratories and manufacturers ensure consistent and internationally accepted methods for vanadium determination in nickel alloys. This enhances the quality and reliability of materials used in critical industrial sectors, supports regulatory compliance, and fosters international trade by using standardized analytical procedures. The flame atomic absorption spectrometric approach outlined in this standard delivers reliable results, crucial for the demanding specifications of modern engineering applications.

Keywords: ISO 7530-9:1993, nickel alloys, vanadium determination, flame atomic absorption spectrometric analysis, chemical analysis, material quality control, metallurgical testing, standard methods.

ISO 7530-9:1993 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Practical Value

Технические детали

ISO 7530-1:1990

Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: General requirements and sample diss…

ISO 5725:1986

Precision of test methods — Determination of repeatability and reproducibility for a standard test method by…

SIST ISO 7530-1:2016

Nickel alloys - Flame atomic absorption spectrometric analysis - Part 1: Determination of cobalt, chromium, c…

ISO 5725-6:1994/Cor 1:2001

Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy va…

ISO 7530-2:1990

Nickel alloys — Flame atomic absorption spectrometric analysis — Part 2: Determination of cobalt content

SIST ISO 7530-8:1996

Nickel alloys -- Flame atomic absorption spectrometric analysis -- Part 8: Determination of silicon content