ISO 7536:1994 PDF

Petroleum products — Determination of oxidation stability of gasoline — Induction period method

Название (английский):

ISO 7536:1994

Petroleum products — Determination of oxidation stability of gasoline — Induction period method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 9
Дата публикации:: 21 июля 1994 г.
Издание:: ISO IS 7536 edition 1 version 1
ICS:: 75.160.20

Тип поставки:

Full version135 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:135 €

Описание (английский):

The principle of the method specified is oxidizing the sample in a pressure bomb initially filled at 15 °C to 25 °C with oxygen at 690 kPa, heating at a temperature between 98 °C and 102 °C, reading the pressure at stated intervals or recorded continuously until the breakpoint is reached. The time required for the sample to reach this point is the observed induction period at the temperature of test, from which the induction period at 100 °C may be calculated. The method is applicable for aviation and motor gasolines in their finished form only.

Технические детали

Технический комитет: ISO/TC 28 - Petroleum and related products, fuels and lubricants from natural or synthetic sources
SKU: ISO 7536:1994

Abstract

Overview

ISO 7536:1994 specifies the induction period method for determining the oxidation stability of gasoline. The test oxidizes a finished aviation or motor gasoline sample in a sealed pressure bomb filled with oxygen and heated; the time to a defined pressure breakpoint is recorded as the induction period. Results are reported as the induction period at 100 °C (IP100), calculated from the observed induction period at test temperature.

Key topics and requirements

Scope: Applies only to finished aviation and motor gasolines (not individual components).
Test principle: Oxidize 50 ml ±1 ml of sample in a pressure bomb filled with oxygen (commercial extra-dry, ≥99% purity) at 690 kPa, heat in a boiling water bath and monitor pressure until the breakpoint is reached.
Temperature: Bath maintained between 98 °C and 102 °C; thermometer and bath specifications in Annex B.
Breakpoint definition: Point in the pressure–time curve preceded by a pressure drop of exactly 14 kPa within 15 minutes and followed by a drop of not less than 14 kPa in 15 minutes.
Recording: Continuous pressure recording or readings at intervals ≤15 minutes.
Sample & apparatus: Glass sample container (50 ml), corrosion‑resistant steel pressure bomb (specification in Annex A), needle valve, pressure gauge (to at least 1 380 kPa) and a stainless steel burst‑disc assembly (rupture >1 530 kPa) for safety.
Result calculation: Convert observed induction period IPt (minutes) to IP100 using formulas:
- If test T > 100 °C: IP100 = IPt × [1 + 0.101 (T − 100)]
- If test T

Overview

Key topics and requirements

Scope: Applies only to finished aviation and motor gasolines (not individual components).
Test principle: Oxidize 50 ml ±1 ml of sample in a pressure bomb filled with oxygen (commercial extra-dry, ≥99% purity) at 690 kPa, heat in a boiling water bath and monitor pressure until the breakpoint is reached.
Temperature: Bath maintained between 98 °C and 102 °C; thermometer and bath specifications in Annex B.
Breakpoint definition: Point in the pressure–time curve preceded by a pressure drop of exactly 14 kPa within 15 minutes and followed by a drop of not less than 14 kPa in 15 minutes.
Recording: Continuous pressure recording or readings at intervals ≤15 minutes.
Sample & apparatus: Glass sample container (50 ml), corrosion‑resistant steel pressure bomb (specification in Annex A), needle valve, pressure gauge (to at least 1 380 kPa) and a stainless steel burst‑disc assembly (rupture >1 530 kPa) for safety.
Result calculation: Convert observed induction period IPt (minutes) to IP100 using formulas:
- If test T > 100 °C: IP100 = IPt × [1 + 0.101 (T − 100)]
- If test T

ISO 7536:1994 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Похожие стандарты

Abstract

Overview

Key topics and requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts