ISO 8283-3:1992 PDF

Name: ISO 8283-3:1992 — Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)
SKU: ISO 8283-3:1992
Price: 25 EUR
Availability: InStock

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)

Название (английский):

ISO 8283-3:1992

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 3 декабря 1992 г.
Издание:: ISO IS 8283 edition 1 version 1
ICS:: 23.040.20

Тип поставки:

Full version60 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

Specifies the design formulae and the derived dimensions, together with tolerances, of sockets and spigots for joints and for integral sockets of PP pipes intended for use in discharge systems inside buildings where such joints are intended to accommodate expansion and contraction.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 8283-3:1992 - Plastics pipes and fittings: Dimensions of sockets and spigots for discharge systems inside buildings - Part 3: Polypropylene (PP). This standard specifies the design formulae, derived dimensions and allowable tolerances for sockets and spigots of polypropylene pipes and fittings used in building discharge (drainage) systems where joints must accommodate thermal expansion and contraction.

Key topics and technical requirements

Scope and purpose: Dimensions for PP ring-seal sockets and related spigots used in soil, waste and drainage systems inside buildings where movement of joints is required.

Design formulae and calculations: Normative Annex A contains relationships and calculation methods for deriving socket and groove dimensions (ring-seal design calculations).

Ring-seal groove designs: Typical groove geometries are illustrated; the standard permits multiple groove designs provided measurement points and sealing function are met.

Measurement points and dimensions: Defines measurement locations (e.g., socket root diameter, spigot outside diameter, length of engagement, lead-in and sealing-zone depth) and requires compliance with limits in the tabulated dimensions.

Permitted nominal sizes: Dimension limits are specified for common nominal outside diameters (32 mm up to 200 mm), aligned with ISO 161-1 nominal series.

Seal-ring and retaining components: Seal-rings are accommodated by groove designs; retaining components may be manufactured from materials other than PP.

Tolerances and rounding rules: Calculated values are rounded to specified precision (diameters to 0.1 mm, other dimensions to nearest 1 mm) and related tolerances are provided in the standard’s tables.

Practical applications

Standardizes interface dimensions for PP discharge pipe joints to ensure watertight, movable connections in building drainage systems.

Useful for designing and manufacturing PP sockets, spigots and groove profiles that are compatible with standard seal rings.

Supports system design where expansion/contraction of pipework must be accommodated (e.g., vertical stacks, long horizontal runs, temperature-variable environments).

Who should use this standard

Pipe and fitting manufacturers producing PP drainage components.

Plumbing and drainage designers and consulting engineers specifying joint types and dimensions.

Installers and contractors who require compatible components and correct sizing.

Standards bodies, test laboratories and regulatory authorities for compliance and product verification.

Related standards

ISO 8283 Parts 1, 2 and 4 (PVC-U/PVC-C, PE, ABS respectively) - complementary documents covering other materials.

ISO 161-1 - nominal outside diameters series referenced by ISO 8283-3.

Keywords: ISO 8283-3:1992, polypropylene pipe, PP sockets and spigots, ring-seal groove, drainage pipe dimensions, discharge systems inside buildings, pipe joint tolerances.

ISO 8283-3:1992 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications

Who should use this standard

Related standards

Технические детали

BS ISO 16110-1:2007

Hydrogen generators using fuel processing technologies. Safety.

SIST ISO 8283-3:1995

Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Pa…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies