ISO 8364:2017 PDF

Name: ISO 8364:2017 — Alpine skis and bindings — Binding mounting area — Requirements and test methods
SKU: ISO 8364:2017
Price: 25 EUR
Availability: InStock

Alpine skis and bindings — Binding mounting area — Requirements and test methods

Название (английский):

ISO 8364:2017

Alpine skis and bindings — Binding mounting area — Requirements and test methods

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 8 декабря 2017 г.
Издание:: ISO IS 8364 edition 5 version 1
ICS:: 97.220.20

Тип поставки:

Full version195 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:195 €

Описание (английский):

ISO 8364:2017 specifies requirements and test methods for the binding mounting area and free space area, ski bindings and retention devices of alpine skis, in order to optimize the compatibility of the functional unit "ski binding ? retention device ? boot". ISO 8364:2017 contains data for the manufacturer of alpine skis, bindings and retention devices, concerning dimensions, tests and other specifications for the binding mounting area.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 8364:2017 - "Alpine skis and bindings - Binding mounting area - Requirements and test methods" defines dimensional, geometric and strength requirements and test methods for the binding mounting area and free space area of alpine skis. Its purpose is to optimize compatibility of the functional unit ski - binding - retention device - boot by giving ski, binding and retention-device manufacturers the data needed for safe, consistent mounting and reliable retention.

Key topics and technical requirements

Free space area: length forward/backward from the mounting point is specified by ski group (Group 1–4). Width minimums: typically 48–53 mm for Groups 1–3 and 46–50 mm for Group 4 depending on position relative to the mounting point.

Geometrical tolerances: longitudinal straightness tolerance when the ski base is pressed on a flat surface - 5 mm (Groups 1–2) and 4 mm (Groups 3–4). Transverse profile must follow a constant curve; no elevation beyond the free space surface outside the area.

Binding mounting area: lengths by group (e.g., 285 mm forward/back for Group 1); minimum drill-hole depth available (d′) 9.5 mm for Groups 1–2 and 7.5 mm for Groups 3–4.

Screw retention strength: minimum retention for two screws at load rate ≤20 mm/min - 2 600 N (Groups 1–2), 1 600 N (Group 3), 1 300 N (Group 4).

Stripping resistance: minimum 5 Nm for Groups 1–2. Note: Groups 3–4 may not achieve 5 Nm; manufacturers must provide mounting instructions and cautions where applicable.

Binding hole patterns and screws: max transverse centre-to-centre screw spacing 42.5 mm (Groups 1–2) and 40.5 mm (Groups 3–4); minimum centre distances depend on direction and group. Required screw penetration after mounting: (8 ± 0.5) mm (Groups 1–2) or (6 ± 0.5) mm (Groups 3–4). Use ISO 6004 screws; mounting plate hole diameter ≤ 8 mm, countersink penetration ≤ 0.6 mm.

Marking and side walls: clear mounting-point mark required; ski property marking (e.g., “G1”) recommended. Side wall design must allow common mounting devices to clamp to at least the running surface.

Applications and practical value

Ensures consistent and safe binding mounting across ski and binding brands.

Guides ski designers on mounting-area geometry, thickness and strength for reliable screw retention.

Informs binding manufacturers on hole patterns, screw lengths and penetration requirements to meet compatibility and safety.

Used by ski shop technicians and mount centers to follow standardized mounting guidelines, reducing risk of binding failure and improving consumer safety.

Related standards

ISO 6004 - Alpine ski binding screws - Requirements

ISO 5355 - Alpine ski-boots - Requirements and test methods

ISO 10045 - Binding mounting area - Requirements for test screws

ISO 4287 - Surface texture (profile method)

Keywords: ISO 8364:2017, alpine skis, binding mounting area, free space area, binding screws, test methods, screw retention strength, ski manufacturers, mounting instructions.

ISO 8364:2017 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and practical value

Who uses this standard

Related standards

Технические детали

SIST ISO 6004:1995

Alpine skis -- Ski binding screws -- Requirements

ISO 5355:1997

Alpine ski-boots — Safety requirements and test methods

SIST ISO 10045:2018

Alpine skis -- Binding mounting area -- Requirements for test screws

ISO 4287:1997/Amd 1:2009

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface t…