ISO 8442-6:2000 PDF
Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 6: Lightly silver-plated table holloware protected by lacquer
Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 6: Lightly silver-plated table holloware protected by lacquer
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 18
- Дата публикации:
- 14 декабря 2000 г.
- Издание:
- ISO IS 8442 edition 1 version 1
- ICS:
- 67.250
La présente norme prescrit les exigences afférentes aux matériaux constitutifs et aux performances des articles d'orfèvrerie de table, et des accessoires moulés, fabriqués à partir de métaux revêtus d'un léger placage d'argent et protégés par un vernis. La présente nomme s'applique aux objets tels que les pots, plats, seaux à champagne, théières et cafetières, plateaux et soupières. Les diverses prescriptions portent sur les articles d'orfèvrerie en laiton, cuivre, bronze, maillechort, étain et acier inoxydable revêtus d'un léger placage d'argent et de vernis. La présente norme ne concerne ni les articles d'orfèvrerie entièrement fabriqués en métaux précieux, laiton, maillechort, acier inoxydable, ni ceux fabriqués en céramique ou en verre, en acier oxydable ou à partir d'une pièce coulée à base de zinc. Des valeurs limites sont fixées pour les métaux de base entrant dans la fabrication des articles d'orfèvrerie avant de déposer le placage d'argent et le vernis. La présente nomme ne comprend aucune prescription concernant la forme, les dimensions ou toute autre caractéristique relevant d'un choix personnel ou pouvant facilement être évaluée par l'acheteur sur le lieu de vente.
Abstract
Overview
ISO 8442-6:2000 specifies material, construction and performance requirements for lightly silver-plated table holloware protected by lacquer that comes into contact with food. It applies to items such as jugs, dishes, wine coolers, tea- and coffee-pots, trays and tureens made from metals (brass, copper, bronze, nickel‑silver, pewter and stainless steel) with a light silver plating and a lacquer coating. The standard excludes holloware made entirely of precious metals, ceramics, glass, non‑stainless steel or zinc‑based die cast.
Key topics and technical requirements
- Coating thickness and composition
- Light silver plating defined as >0.3 µm and
Технические детали
- Технический комитет
- ISO/TC 186 - Cutlery and table and decorative metal hollow-ware
- SKU
- ISO 8442-6:2000
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…