ISO 8796:2004 PDF

Name: ISO 8796:2004 — Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements
SKU: ISO 8796:2004
Price: 25 EUR
Availability: InStock

Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements

Название (английский):

ISO 8796:2004

Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 18 июня 2004 г.
Издание:: ISO IS 8796 edition 2 version 1
ICS:: 23.040.20

Тип поставки:

Full version60 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

ISO 8796:2004 specifies a method of determining the susceptibility to environmental stress cracking (ESC) of polyethylene PE 32 and PE 40 pipes intended for use with insert-type fittings.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 8796:2004 specifies a standardized test method and pass/fail requirements to determine the susceptibility of polyethylene pipes (PE 32 and PE 40) used for irrigation laterals to environmental stress cracking (ESC) induced by insert-type fittings. The standard addresses the common field problem where insert fittings that grip the pipe internally create multi-axial stresses at the contact points, potentially initiating longitudinal cracks that can compromise joints.

Why this matters: ESC can lead to premature joint failure in low-pressure irrigation systems (e.g., drip irrigation). ISO 8796:2004 provides a reproducible laboratory procedure to evaluate pipe resistance and to support product qualification, quality control, and procurement decisions.

Key Topics

Scope and applicability: Applies to PE 32 and PE 40 pipes intended for use with insert-type fittings and conforming to ISO 8779.

Test principle: Conditioned pipe sections are sharply bent to form two U-bends in perpendicular planes, immersed in a reaction solution at (70 ± 2) °C for one hour, then inspected visually for cracks originating at the folds.

Reagent: Uses a nonionic surface-active agent (nonylphenoxy poly(ethyleneoxy)ethanol type) mixed with water to prepare the reaction solution. Fresh solution is used for each test.

Specimens and sample size: Sections about 20d long (where d is nominal diameter) are cut; five specimens are tested per run, each producing two independent bends.

Pass/fail criteria: A bend is classified as failed if it exhibits a visible crack originating at the fold (whitening alone is not a failure). The pipe passes the test if not more than 10% of bends tested fail. Retesting rules apply when isolated failures occur.

Reporting: Test reports must reference ISO 8796, identify the sample and dimensions, state the number of specimens and failed bends, indicate pass/fail status, and record test dates.

Applications

Product qualification of PE 32 and PE 40 irrigation lateral pipes against ESC risk when used with insert-type fittings.

Quality control in manufacturing and incoming inspection of irrigation pipe batches.

Support for procurement specifications, ensuring joint reliability in drip and low-pressure irrigation systems.

Investigation of field failures where insert fittings are suspected to have induced stress cracking.

Related Standards

ISO 8779 - Specifications for polyethylene (PE) pipes for irrigation laterals (normative reference in ISO 8796:2004).

Other ISO or national standards covering polyethylene pipe materials, mechanical testing, and joining fittings may be consulted for complementary requirements.

This summary highlights the practical value of ISO 8796:2004 for manufacturers, test laboratories, irrigation system designers, and procurement teams focused on preventing environmental stress cracking at insert-type fittings.

ISO 8796:2004 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 8779:2010/Amd 1:2014

Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications — Amendment 1

ISO 8796:1989

Polyethylene (PE) 25 pipes for irrigation laterals — Susceptibility to environmental stress-cracking induced…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies