ISO 898-6:1994 PDF
Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread
Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Количество страниц:
- 9
- Дата публикации:
- 15 декабря 1994 г.
- Издание:
- ISO IS 898 edition 2 version 1
- ICS:
- 21.060.20
Cancels and replaces the first edition (1988). Specifies the mechanical properties of nuts with specified proof load values when tested at an ambient temperature range of +10 °C to +35 °C. Applies to nuts with nominal thread diameters from 8 mm up to and including 39 mm, of triangular ISO thread, with diameter/pitch combinations in accordance with ISO 261, with thread tolerances 6H in accordance with ISO 965-1 and 965-2, with specific mechanical requirements, with widths across flats as specified in ISO 272, with nominal heights greater than or equal to 0,5d, made of carbon steel or alloy steel. Does not apply to nuts requiring special properties as weldability, prevailing torque performance, corrosion resistance, ability to withstand temperatures above +300 °C or below -50 °C.
Технические детали
- Технический комитет
- ISO/TC 2/SC 12 - Fasteners with metric internal thread
- SKU
- ISO 898-6:1994
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…