ISO 8987:2005 PDF

Overview

ISO 8987:2005 - "Plastics - Phenolic resins - Determination of reactivity on a B‑transformation test plate" specifies laboratory test methods to measure the B‑transformation time (reactivity) of phenolic resins on a heated test plate. The standard defines two alternative procedures depending on the test plate geometry: Method A (plate with spherical‑segment depressions) and Method B (flat plate). Test conditions and endpoints are defined so that results can be used for formulation comparison, quality control and research.

Key topics and technical requirements

• Scope and principle: Measures the time from initial contact of 0.5 g ± 0.05 g of resin with a heated plate until the resin reaches the B‑stage (gel/elastic behavior).
• Two methods:
  • Method A: Plate with depressions (segments of spheres). Agitation performed with a glass rod; B‑stage indicated when filaments formed with the rod break on lifting.
  • Method B: Flat chromed plate (~15 × 15 cm). Resin spread with a spatula and stirred; B‑stage indicated when the material no longer stretches and appears gel‑like or rigid.
• Apparatus and measurement control:
  • Thermostatic control with temperature measurement accuracy of ±0.5 °C.
  • Plate heating device or integrated heated plate; molten salts may be used as the heat‑transfer medium where applicable.
  • Ancillary equipment: glass rod (Method A), spatula (Method B), balance (0.01 g readability), syringe for liquid resins, precise stopwatch.
• Test procedure: Start the timer when resin contacts the plate; follow prescribed agitation/stirring patterns; record time to B‑stage in minutes and seconds.
• Performance: Reported repeatability ±4% and reproducibility ±10%.
• Test report requirements: Reference the standard and method used, sample identification, plate temperature, individual and mean B‑transformation times, and test date.

Applications and users

ISO 8987:2005 is practical for:

• Manufacturers and formulators of phenolic resins who need to evaluate resin reactivity for molding, adhesives, laminates, coatings and other thermosetting applications.
• Quality control and production laboratories monitoring batch‑to‑batch consistency.
• R&D and polymer chemists developing or modifying phenolic resin systems and curing schedules.
• Third‑party test labs and certification bodies performing standardized comparative testing.

Keywords: ISO 8987:2005, phenolic resins reactivity, B‑transformation test plate, Method A, Method B, heated test plate, thermostatic control, test method.

Related standards

• Developed by ISO/TC 61 (Plastics), Subcommittee SC 12 (Thermosetting materials). For broader context, consult other ISO standards on plastics and thermosetting resin testing published by ISO/TC 61.