ISO 9029:1990 PDF

Name: ISO 9029:1990 — Crude petroleum — Determination of water — Distillation method
SKU: ISO 9029:1990
Price: 25 EUR
Availability: InStock

Crude petroleum — Determination of water — Distillation method

Название (английский):

ISO 9029:1990

Crude petroleum — Determination of water — Distillation method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 13 декабря 1990 г.
Издание:: ISO IS 9029 edition 1 version 1
ICS:: 75.040

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

The precision data of this procedure have only been determined for water contents up to 1 % (V/V). Includes principle, apparatus, solvent, calibration and recovery test, sampling, procedure, expression of results, precision and test report. The distillation apparatus is shown in figures 1 and 2. The precision of the method is shown in figure 3. The sample handling is described in annex A.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - ISO 9029:1990 (Crude petroleum - Determination of water - Distillation method)

ISO 9029:1990 specifies a laboratory distillation method to determine water content in crude petroleum. The procedure uses a water‑immiscible solvent (xylene per ISO 5280) that co‑distills with water; condensed solvent and water collect in a graduated trap and the water layer is measured. Precision data were established for water contents up to 1% (V/V). Annex A gives required sample‑handling and homogenization instructions. The standard includes principle, apparatus, solvent, calibration and recovery tests, sampling, procedure, expression of results, precision and test report requirements.

Key topics and technical requirements

Principle: Reflux/distillation with a water‑immiscible solvent; separation of condensed solvent and water into a graduated trap.

Apparatus: Recommended assembly includes a 1000 ml round‑bottom flask (24/39 joint), Liebig condenser with sealed inner tube, a 5 ml graduated trap (0.05 ml graduations), drying tube, heater (electric mantle recommended), jet‑spray tube, and pick/scraper.

Solvent: Xylene meeting ISO 5280 specifications; solvent blank required to check solvent water content.

Calibration & recovery: Calibrate trap (micro‑pipette increments) and verify overall water recovery by adding known water volumes to 400 ml xylene and checking measured recovery against specified tolerances.

Sampling & sample handling: Follow ISO 3170 / ISO 3171 sampling rules; Annex A details homogenization (high‑shear mixing or equivalent) and transfer to test portions.

Procedure & expression of results: Test portion plus xylene to 400 ml, controlled heating and rinse/wash‑down to dislodge condensate; results reported on a volume or mass basis and rounded per clause 10 (typical rounding to 0.025 %).

Precision: Precision established for 0–1% (V/V). For the 0.1–1.0% (V/V) range, reported repeatability and reproducibility values are available in the standard (repeatability ≈ 0.08% V/V; reproducibility ≈ 0.11% V/V); lower values are shown graphically for 0–0.1% (see figure 3).

Safety: The method involves hazardous materials and operations; users must apply appropriate safety and regulatory practices.

Applications and who uses this standard

Refineries and custody transfer - correcting volumes for water content during purchase, sale and transfer.

Petroleum testing laboratories - routine QC/QA determination of free and volatile water in crude oil.

Operators and inspectors - verification of tank or pipeline contents.

Standards and compliance teams - to ensure measurement traceability and inter‑laboratory comparability.

Related standards

ISO 5280 (xylene specification)

ISO 3170 / ISO 3171 (manual and automatic petroleum sampling)

ISO 383 (glassware joints)

ISO 4259 (precision data treatment)

Keywords: ISO 9029:1990, crude petroleum, water determination, distillation method, xylene, water content, trap calibration, sampling, precision.

ISO 9029:1990 PDF

Abstract

Похожие стандарты

Overview - ISO 9029:1990 (Crude petroleum - Determination of water - Distillation method)

Key topics and technical requirements

Applications and who uses this standard

Related standards

Технические детали

ISO 5280:1979

Xylene for industrial use — Specification

ISO 31700-1:2023

Consumer protection — Privacy by design for consumer goods and services — Part 1: High-level requirements

SIST EN ISO 3171:1999

Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)

ISO 3838:2004/Amd 1:2023

Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capil…

SIST EN ISO 4259-5:2024

Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessmen…