ISO 9329-1:1989 PDF

Name: ISO 9329-1:1989 — Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties
SKU: ISO 9329-1:1989
Price: 25 EUR
Availability: InStock

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties

Название (английский):

ISO 9329-1:1989

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 29 июня 1989 г.
Издание:: ISO IS 9329 edition 1 version 1
ICS:: 23.040.10

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

Applies to seamless steel tubes with circular section of non-alloy quality steel. These tubes are provided for general pressure purposes including transporting of pressurized fluids. There are standards and rules permitting the use of these tubes up to a temperature of 350 0C (see annex A). The terms "tube" and "pipe" are synonymous terms. For general technical delivery conditions see ISO 404.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 9329-1:1989 specifies technical delivery conditions for seamless steel tubes for pressure purposes - Part 1 focuses on unalloyed steels with specified room-temperature properties. It applies to seamless, circular-section tubes intended for general pressure service, including the transport of pressurized fluids. The standard defines requirements for manufacture, inspection, testing and documentation for tubes used in pressure applications (the terms “tube” and “pipe” are synonymous).

Key topics and requirements

Scope and materials

Seamless tubes of non‑alloy (unalloyed) quality steel with defined room-temperature mechanical properties.
Some application standards permit use of these tubes up to 350 °C (see Annex A).

Manufacture and condition

Tubes must be produced by seamless processes and may be hot‑finished or cold‑finished.
Steels for these tubes shall be killed (no semi‑killed steels).
Heat‑treatment/delivery conditions (e.g., normalized, annealed) are specified; manufacturer choice unless purchaser specifies.

Chemical and metallurgical controls

Ladle (melt) analysis and optional product analysis requirements with permissible deviations; specified chemical limits for steel grades (e.g., TS 360, TS 410, TS 430, TS 500) are given.

Mechanical properties and tests

Room‑temperature tensile, yield/proof stress, elongation and bend/flattening tests are specified.
Test methods and sample locations follow referenced ISO test standards.

Dimensions, tolerances and appearance

Outside diameters, wall thicknesses and masses are selected from ISO 4200 tables.
Tolerances on diameter, wall thickness, ovality and length are specified; surface finish and acceptable imperfections defined.

Inspection, testing and documentation

Defines batching rules, sampling, specific and non‑specific inspection.
Typical test/documents include test reports (TR), inspection certificates (IC, ICP) and inspection reports (IR).

Weldability and repair

Steels are generally regarded as weldable; repair by welding allowed by agreement and controlled methods.

Applications and users

Typical applications: pressure vessels, boilers, heat exchangers, piping for transporting pressurized liquids and gases, and other pressure systems where room‑temperature properties are critical.

Primary users: tube manufacturers, material purchasers, design and pressure‑equipment engineers, fabricators, inspection authorities and testing laboratories specifying or verifying compliance with ISO 9329-1.

Related standards

ISO 404 - General technical delivery requirements for steel products

ISO 4200 - Dimensions and masses for plain‑end steel tubes

ISO 6992, ISO 6992 - Tensile testing for metallic materials

ISO 5252 - Tube tolerance systems

Referenced test standards (bend, flattening, hydraulic, classification): ISO 7439, ISO 9492, ISO 9302, ISO 4948, ISO 2566-1

Keywords: ISO 9329-1, seamless steel tubes, pressure purposes, unalloyed steels, technical delivery conditions, room temperature properties, tube tolerances, inspection certificate.

ISO 9329-1:1989 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

SIST ISO 4:2003

Information and documentation -- Rules for the abbreviation of title words and titles of publications

BS EN ISO 4048:2018

Leather. Chemical tests. Determination of matter soluble in dichloromethane and free fatty acid content.

SIST ISO 699:2016

Pulps - Determination of alkali resistance

ISO 5252:1977

Steel tubes — Tolerance systems

SIST EN ISO 7439:2023

Copper-bearing contraceptive intrauterine devices - Requirements and tests (ISO 7439:2023)

ISO 9302:1989

Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing…

ISO 4948-2:1981

Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main quality clas…