ISO 9381:2005 PDF

Name: ISO 9381:2005 — Hinged or pivoted doors — Determination of the resistance to static torsion
SKU: ISO 9381:2005
Price: 25 EUR
Availability: InStock

Hinged or pivoted doors — Determination of the resistance to static torsion

Название (английский):

ISO 9381:2005

Hinged or pivoted doors — Determination of the resistance to static torsion

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 20 октября 2005 г.
Издание:: ISO IS 9381 edition 2 version 1
ICS:: 91.060.50

Тип поставки:

Full version45 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:45 €

Описание (английский):

ISO 9381:2005 applies to all vertically hinged or pivoted doors. ISO 9381:2005 specifies the method to be used to determine the permanent deformation caused when static stress in torsion is applied to an open door leaf fixed in its own door frame as part of a doorset. ISO 9381:2005 can also be used in respect a door leaf submitted for test in a frame which the manufacturer considers appropriate to and typical for the intended utilisation.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 9381:2005 is an international standard published by the International Organization for Standardization (ISO) that specifies the method for determining the resistance to static torsion of hinged or pivoted doors. This standard applies to all vertically hinged or pivoted doors and focuses on measuring the permanent deformation caused when a static torsion force is applied to an open door leaf fixed in its own door frame as part of a complete doorset. The standard is essential for manufacturers, testing laboratories, and quality assurance professionals involved in door design, testing, and certification.

The purpose of ISO 9381:2005 is to ensure that doors subjected to static torsional stress-such as during attempts to force open or unjam a door-maintain structural integrity without suffering damage or significant deformation that could impair their performance.

Key Topics

Scope and Applicability ISO 9381:2005 applies specifically to vertically hinged or pivoted doors in a vertical plane. It is relevant both for door leaves tested within their manufacturer-recommended frames and for those assessed with typical frames representative of intended use.

Testing Methodology The standard defines a precise procedure to measure door leaf deformation under a defined static torsion load:

Door leaf is positioned open at approximately 90 degrees in its frame.
A preload is applied to compensate for hinge play.
A calibrated static torsional force (F), adjustable with a precision device, is applied at the lower corner on the lock side.
Deformations during and after load application are carefully measured using high-accuracy comparators.

Test Equipment Requirements for rigid and non-deforming test frames, calibrated load application devices, and precise measuring instruments with accuracy to 0.01 mm are specified to ensure consistency and reliability of test results.

Results and Documentation The standard details the recording of deformation under load and residual deformation after unloading. Test reports must include comprehensive information, such as door and frame details, load applied, environmental conditions during testing, and any damage observed.

Applications

Door Manufacturing and Quality Control Door manufacturers use ISO 9381:2005 to validate and certify that their hinged or pivoted doors meet structural performance requirements concerning torsional rigidity and durability under static stress conditions.

Product Certification and Compliance This standard supports product certification schemes and regulatory compliance by providing an internationally recognized test method for torsional resistance.

Design and Engineering Engineers can utilize the results generated through this standard's test procedures to improve door leaf and frame designs to enhance durability, safety, and performance under torsional forces.

Installation and Maintenance Understanding torsional resistance as per ISO 9381:2005 aids installers and maintenance personnel in selecting appropriate door systems for applications where static torsional stresses may occur, such as in high-traffic or security-sensitive environments.

Related Standards

ISO 129 (Previous related standard) Replaced by EN 948:1999 and closely aligned with ISO 9381, it addressed door leaf testing methods in Europe.

EN 948:1999 The European equivalent harmonized with ISO 9381:2005, ensuring consistent torsional resistance testing requirements across European markets.

ISO/TC 162 Series - Doors and Windows ISO 9381:2005 is part of a broader series of standards covering various aspects of door and window testing and performance requirements.

Keywords: ISO 9381:2005, static torsion resistance, hinged doors testing, pivoted doors, door leaf deformation, door frame testing, torsional stress, door quality standards, international door testing, ISO door standards.

ISO 9381:2005 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

BS ISO 12991:2012

Liquefied natural gas (LNG). Tanks for on-board storage as a fuel for automotive vehicles.

SIST ISO 938:1999

Hand-operated stillage trucks -- Principal dimensions

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies