ISO 9461:1992 PDF

Name: ISO 9461:1992 — Hydraulic fluid power — Identification of valve ports, subplates, control devices and solenoids
SKU: ISO 9461:1992
Price: 25 EUR
Availability: InStock

Hydraulic fluid power — Identification of valve ports, subplates, control devices and solenoids

Название (английский):

ISO 9461:1992

Hydraulic fluid power — Identification of valve ports, subplates, control devices and solenoids

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 15 декабря 1992 г.
Издание:: ISO IS 9461 edition 1 version 1
ICS:: 23.100.50

Тип поставки:

Full version45 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:45 €

Описание (английский):

Specifies rules for the identification. Applies in particular to valves which will be developed in future with two and three ports, where today's practice of marking valve ports is different. The identification rules apply to those ports which provide the connection between two valves or between a valve and a pipe.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 9461:1992 defines standardized rules for the identification of valve ports, subplates, control devices and solenoids used in hydraulic fluid power systems. The standard targets consistent marking practices so valves and subplates can be assembled and connected correctly, reducing installation errors and improving system interoperability and maintenance.

The standard complements existing surface-mounting standards (for example ISO 4401, ISO 5781, ISO 6263 and ISO 6264) and is intended as a recommended practice for new and evolving valve designs, particularly two-, three- and four-port valves.

Key Topics

Scope and intent: Identification rules apply to ports that connect valves to other valves or to pipes. Subplate port markings must reflect the actual function of the mounted valve.

In-line vs subplate-mounted valves: For in-line valves an arrow may replace letter marking to indicate flow direction when unambiguous. For subplate-mounted valves, the valve port function shall match the subplate marking.

Main-port identifiers:

P - inlet (normal inlet port)
A, B - working (outlet) ports
T - return-to-tank (return) port
For two-port valves, P = inlet and T = outlet in pressure-relief types where applicable.

Pilot and auxiliary ports:

X, Y - pressure pilot ports (used for remote control or pilot supply/return). X is typically reserved for supply to pilot stage or the control-device port.
V - pilot ports operating by venting to a lower pressure (lower-pressure pilot)
L - drain port (returns leakage or nozzle flows to tank)
M - take-off-point port (sampling of operating fluid)

Solenoid identification: Solenoids for main or pilot stages shall use the same identification as the corresponding main ports, facilitating correct electrical-mechanical integration.

Compliance statement: ISO 9461:1992 provides a recommended identification statement for use in documentation and catalogs when electing to comply with the standard.

Applications

Ensures safe and correct assembly of hydraulic valves and subplates in mobile and industrial hydraulic circuits.

Simplifies maintenance, troubleshooting and documentation by standardizing port labeling.

Supports interoperability between components from different manufacturers by providing common marking conventions.

Related Standards

ISO 4401 - mounting surfaces for four-port directional control valves

ISO 5781 - pressure-control valves and related products

ISO 6263 / ISO 6264 - compensated flow-control and pressure-relief valve mounting surfaces

Keywords: hydraulic valve ports identification, subplates, control devices, solenoids, port marking, hydraulic assembly, ISO 9461:1992.

ISO 9461:1992 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 4401:1994

Hydraulic fluid power — Four-port directional control valves — Mounting surfaces

SIST ISO 5781:2021

Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and che…

ISO 6263:1997

Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces

BS ISO 6264:1998

Hydraulic fluid power. Pressure-relief valves. Mounting surfaces