ISO 9932:2021 PDF

Name: ISO 9932:2021 — Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods
SKU: ISO 9932:2021
Price: 25 EUR
Availability: InStock

Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods

Название (английский):

ISO 9932:2021

Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 1 марта 2021 г.
Издание:: ISO IS 9932 edition 2 version 1
ICS:: 85.060

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

This document describes general test methods for determining the water vapour transmission rate of sheet materials by means of a dynamic gas method or a static gas method. Depending on the method and specific apparatus employed, materials up to 38 mm thick and with water vapour transmission rates in the range from 0,05 g/(m2·d) to 65 g/(m2·d) can be tested. The basis of the function of the instrumental techniques is briefly described. Advice on calibration is given in Annex B.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 9932:2021 specifies laboratory test methods for determining the water vapour transmission rate (WVTR) of sheet materials such as paper and board using two instrumental techniques: the dynamic sweep gas method (Method A) and the static gas (electrolytic) method (Method B). Depending on equipment, the standard covers materials up to 38 mm thickness and WVTRs from 0.05 to 65 g/(m2·d). Annexes provide guidance on saturated saline solutions (Annex A) and calibration (Annex B). ISO 9932:2021 is a minor revision of the 1990 edition and complements gravimetric dish methods (see ISO 2528).

Key topics and technical requirements

Scope and applicability: Instrumental methods for sheet materials, suitable for very low transmission rates and thicker specimens compared to gravimetric methods.

Method A - Dynamic sweep gas:

Principle: One side held at high relative humidity, the other swept by a dry inert gas; moisture in the sweep gas is detected by a sensor (electrical resistance, electrolytic cell or infrared).
Requirements: sealed test cell, controlled temperature (normally 23 °C ±1 °C or 38 °C ±1 °C), desiccated sweep gas (air or nitrogen), sensitive sensor (detect ~0.05 % RH or better), and calibration specimen.

Method B - Static gas (electrolytic):

Principle: Test piece seals a cell containing an electrolytic element; water vapour entering the cell is electrolysed and measured as current (microammeter) per Faraday’s law.
Requirements: humidity cabinet, stainless steel test cells, electrolytic element construction, control box with microammeter calibrated to g/(m2·d).

Sampling and specimen preparation: Follow ISO 186 for sampling; prepare multiple test pieces (ten), account for face orientation, edge sealing for composites or thick specimens (aluminium foil tape guidance).

Calibration and precision: Annex B covers instrument standardization; the document includes a general statement of precision and comparison notes with gravimetric (ISO 2528).

Practical applications and users

ISO 9932:2021 is used where accurate WVTR data are critical:

Packaging engineers assessing barrier performance of paper, board and laminates.

Quality control and testing laboratories needing faster results and higher sensitivity than gravimetric dish methods.

R&D teams developing barrier coatings, composite sheets and multilayer materials.

Building-materials testing where moisture transmission through panels and sheets affects performance.

Instrument manufacturers and calibration labs for validating and standardizing WVTR test cells.

ISO 9932:2021 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

SIST ISO 2528:2018

Sheet materials -- Determination of water vapour transmission rate (WVTR) -- Gravimetric (dish) method

BS ISO 18692-1:2026

Fibre ropes for offshore stationkeeping. General specification.

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies