ISO/IEC 14165-115:2006 PDF

Name: ISO/IEC 14165-115:2006 — Information technology — Fibre Channel — Part 115: Physical Interfaces (FC-PI)
SKU: ISO/IEC 14165-115:2006
Price: 25 EUR
Availability: InStock

Information technology — Fibre Channel — Part 115: Physical Interfaces (FC-PI)

Название (английский):

ISO/IEC 14165-115:2006

Information technology — Fibre Channel — Part 115: Physical Interfaces (FC-PI)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 96
Дата публикации:: 2 марта 2006 г.
Издание:: ISO/IEC IS 14165 edition 1 version 1
ICS:: 35.200

Тип поставки:

Full version1 440 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:16 раб. дн. (перевод)

Цена:1 440 €

Описание (английский):

Fibre Channel provides a general data transport vehicle for Upper Level Protocols (ULPs) such as Intelligent Peripheral Interface (IPI) and Small Computer System Interface (SCSI) command sets, the High-Performance Parallel Interface (HIPPI) data framing, IP (Internet Protocol), ANSI/IEEE 802.2 and others. This International Standard describes the physical interface portions of a high performance serial link that supports the higher Upper Level Protocols (ULPs) associated with HIPPI, IPI, SCSI, IP and others.

Abstract

Похожие стандарты

Другие стандарты ISO

Overview

ISO/IEC 14165-115:2006 (FC-PI) specifies the physical interface portions of the Fibre Channel high‑performance serial link. It defines the optical and electrical interface requirements that enable Fibre Channel to transport Upper Level Protocols (ULPs) such as IPI, SCSI, HIPPI, IP and IEEE 802.2. The standard focuses on transmitter/receiver behaviour, connector and cable plant specifications, jitter/eye performance, and interoperability/compliance points required for robust serial data transport.

Key Topics

Scope and architecture: FC-PI describes the FC‑0 layer (physical interfaces) and how it supports higher ULPs.

Optical interface specification: Requirements for single‑mode (SM) and multi‑mode (MM) links, optical input/output interfaces, jitter budgets, and laser safety considerations.

Optical receptacles and connectors: Performance and mechanical specs for common connectors covered in the document (SC, LC, MT‑RJ, SG, MU) and duplex configurations.

Fibre cable plant: Cable plant loss budgets, optical return loss, fibre types and modal bandwidth guidance for SM and MM deployments.

Electrical interface specification: Transmitted/received signal characteristics, jitter and eye masks, impedance, Tx/Rx connections and example SERDES interfaces (see Annex B).

Connectors and cable plant (electrical): Shielding, balanced/unbalanced connector guidance, inter‑ and intra‑enclosure connector norms.

Operational functions: Receiver initialization, Loss‑of‑Signal (Rx_LOS), Tx‑Off/Rx‑LOS detection and speed‑agile port behaviours (speed negotiation).

Compliance & test methods: Defined compliance points, test procedures and informative annexes for validation and interoperability testing.

Applications

ISO/IEC 14165-115:2006 is used by:

Hardware designers of transceivers, line cards and SERDES to meet FC physical layer requirements.

Cable and connector manufacturers to produce compliant fibre and electrical interconnects.

Systems and storage architects who deploy Fibre Channel SANs and high‑performance links (SCSI over Fibre Channel, IP over Fibre Channel, HPC interconnects).

Test and certification labs performing compliance, interoperability and jitter/eye mask testing.

Network engineers planning cable plants and connector choices for data centres and enterprise storage networks.

Related standards

FC‑0 layer descriptions and other Fibre Channel parts referenced within the standard (see normative references in the document).

Upper Level Protocol standards (SCSI, IP, IPI, HIPPI, IEEE 802.2) that run over the Fibre Channel transport.

Keywords: ISO/IEC 14165-115:2006, Fibre Channel, FC-PI, physical interfaces, optical interface, electrical interface, fibre cable plant, connectors, jitter, eye masks, Tx Rx characteristics.

ISO/IEC 14165-115:2006 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related standards

Технические детали

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines

ISO/ASTM52901-17(2023)

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts