ISO/IEC 15757:1998 PDF

Overview - ISO/IEC 15757:1998 (DA-2 format)

ISO/IEC 15757:1998 defines the physical, magnetic and recording-format requirements for data interchange on 8 mm wide magnetic tape cartridges using helical-scan recording in the DA-2 format. The standard enables reliable cartridge interchange between drives by specifying cartridge case geometry, unrecorded tape characteristics, recorded-signal quality, recording method and the on-tape data format (physical blocks, search fields, servo areas, track layout and partitions). It also details conformance rules for generating and receiving drives and environmental, safety and transportation guidance.

Key topics and technical requirements

• Physical cartridge and tape mechanics: dimensions, holding areas, window, label and datum areas, reel locks, tape path and access clearances.
• Unrecorded tape properties: material, tape length and width, thickness, curl/cupping, layer-to-layer adhesion, tensile strength, winding and splice requirements.
• Magnetic recording characteristics: test conditions, signal amplitude, resolution, narrow-band SNR, overwrite behavior, missing-pulse limits, Typical Field and Standard Reference Amplitude (SRA).
• Reference calibration: Master Standard Reference Tape and Secondary Standard Reference Tapes for SRA and other calibration tasks; Test Recording Current (TRC) defined relative to Standard Reference Current (Ir).
• Format and track layout: track-pair format, physical block types (data, erase, diagnostic, file marks, set marks, EOD), search field format and ECC/CRC for error detection and correction.
• Error control and data integrity: CRC generation, ECC/Hamming code annexes, randomization, Read Back Check (RBC) behavior.
• Track geometry and recording method: track pitch, width, azimuth, bit-cell lengths and bit shift constraints.
• Environmental and safety limits: specified testing, operating (5–45 °C; RH 20–80 %), storage (5–32 °C; RH 20–60 %) and stray magnetic field limits; transportation recommendations in Annex K.

Applications and practical value

• Ensures cross-vendor compatibility for archival, backup and data interchange on 8 mm helical-scan cartridges.
• Used to certify media manufacturers, drive designers, and system integrators that need mechanical, magnetic and logical interoperability.
• Supports long-term data preservation workflows, media calibration labs, and quality control for tape production and drive validation.
• Provides prescriptive guidance for drive firmware implementing on-tape formatting, ECC/CRC handling, compression registration and host-drive interfaces.

Who should use this standard

• Tape cartridge and magnetic media manufacturers
• Tape drive and recorder designers and test labs
• IT architects and data-center engineers managing tape-based backup/archival systems
• Preservation specialists and organizations requiring reliable media interchange

Related standards

• ISO 527-1 (plastics tensile testing), ISO 1302 (surface texture), ISO/IEC 11576 (lossless compression algorithm registration), IEC 950 (IT equipment safety) - all referenced by ISO/IEC 15757:1998 for normative requirements and test procedures.