ISO/IEC 29145-1:2014 PDF

Name: ISO/IEC 29145-1:2014 — Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services — Part 1: PHY Layer
SKU: ISO/IEC 29145-1:2014
Price: 25 EUR
Availability: InStock

Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services — Part 1: PHY Layer

Название (английский):

ISO/IEC 29145-1:2014

Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services — Part 1: PHY Layer

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 30
Дата публикации:: 27 марта 2014 г.
Издание:: ISO/IEC IS 29145 edition 1 version 1
ICS:: 35.110

Тип поставки:

Full version450 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:5 раб. дн. (перевод)

Цена:450 €

Описание (английский):

ISO/IEC 29145-1:2014(E) specifies the physical (PHY) layer of WiBEEM (Wireless beacon-enabled energy efficient mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh network topology as well as device mobility and QoS.

Abstract

Похожие стандарты

Другие стандарты ISO

Overview

ISO/IEC 29145-1:2014 defines the PHY (physical) layer for WiBEEM - the Wireless Beacon-enabled Energy Efficient Mesh network - aimed at wireless home network services. The standard specifies radio frequency operation, packet (PPDU) formats, PHY services and management (PLME), channel assignments, transmit/receive behavior and performance definitions that enable a low‑power mesh topology supporting device mobility and QoS. WiBEEM builds on IEEE 802.15.4 concepts and introduces a beacon‑centric superframe (including a Beacon‑Only Period, BOP) to improve energy efficiency and network responsiveness.

Key topics and technical requirements

PHY scope and reference model: Defines the PHY service primitives (PD‑SAP and PLME‑SAP) and management interfaces used by higher layers.

Superframe and beacon mode: Introduces the BOP in the superframe to propagate beacons across mesh nodes for synchronization, mobility support and topology reconfiguration.

Operating frequencies and channels: Includes band/channel assignments (e.g., 2 450 MHz PHY) and related constraints for home network deployments.

PPDU and framing: Specifies the general packet formats, SFD and frame length rules for PHY layer PDUs.

Modulation, spreading and data rates: Describes modulation and chip mapping functions used by the 2.450 MHz PHY and overall PHY signal processing (figures and symbol‑to‑chip mappings are included).

Receiver and transmitter requirements: Covers transmit power, out‑of‑band spurious emission, receiver sensitivity definitions, ED/CCA functions, turnaround times and error‑vector magnitude (EVM) guidance.

PHY constants and PIB attributes: Lists PHY constants, parameter information base attributes and enumerations used for configuration and conformance testing.

Practical applications

Smart home and consumer IoT networks that require low power consumption, scalable mesh connectivity and support for mobile devices (e.g., wearables, portable sensors).

Home automation systems demanding reliable QoS and timely device discovery/synchronization across mesh nodes.

Implementations where beacon‑based scheduling and energy efficiency are critical, such as battery‑operated sensors and smart appliances.

Who should use this standard

Device manufacturers (chipsets, radios, sensors) implementing PHY firmware conformant to WiBEEM.

System integrators and solution architects designing wireless home networks with mesh and mobility needs.

Test laboratories and certification bodies validating PHY conformance (PPDU format, receiver sensitivity, TX power, spurious emissions).

Standards developers and technical committees aligning higher‑layer protocols (MAC, network) with WiBEEM PHY behaviors.

Related standards

IEEE 802.15.4 (PHY/MAC baseline referenced in the introduction) - WiBEEM extends the beacon and MAC usage for energy‑efficient mesh operation.

Relevant ISO/IEC 29145 parts for MAC and upper layers (see the ISO/IEC 29145 series for further parts).

Keywords: ISO/IEC 29145-1:2014, WiBEEM, PHY layer, wireless home network, low‑power mesh, beacon mode, superframe, BOP, IEEE 802.15.4, PPDU, receiver sensitivity, QoS, device mobility.

ISO/IEC 29145-1:2014 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications

Who should use this standard

Related standards

Технические детали

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines

ISO/ASTM52901-17(2023)

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts