ISO/IEC 29341-18-4:2011 PDF
Information technology — UPnP Device Architecture — Part 18-4: Remote Access Device Control Protocol — Remote Access Discovery Agent Device
Information technology — UPnP Device Architecture — Part 18-4: Remote Access Device Control Protocol — Remote Access Discovery Agent Device
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 5
- Дата публикации:
- 30 августа 2011 г.
- Издание:
- ISO/IEC IS 29341 edition 1 version 1
- ICS:
- 35.200
ISO/IEC 29341-18-4:2011(E) describes the device definition which is compliant with the UPnP Device Architecture version 1.0. It defines a device type referred to herein as RADiscoveryAgent device. The RADiscoveryAgent device is a UPnP device that provides the functionality capability for synchronizing the UPnP discovery information between two remote networks. The Remote Access Discovery Agent functionality is a combination of a RADASync service and a control point functionality that interacts with a remote RADASync service running on the remote network. Each control point is pushing discovery information about devices available in its local area network to its corresponding RADASync peer. This device provides control points with the following functionality: - Ability to push discovery information from a remote network that will be used to recreate and propagate the original information into the local network. - Ability to propagate multicast events from a remote network into the local network.
Abstract
Overview
ISO/IEC 29341-18-4:2011 defines the Remote Access Discovery Agent (RADiscoveryAgent) device compliant with the UPnP Device Architecture version 1.0. This international standard specifies a UPnP device type designed to synchronize UPnP discovery information between two remote networks. The RADiscoveryAgent combines a RADASync service with control point functionality, enabling discovery data exchange and interaction across distinct network boundaries.
The primary purpose is to enable seamless propagation of device discovery information and multicast events from a remote network into a local network. This ensures that UPnP devices on one network can be discovered and accessed transparently from another remote network environment via standardized protocols.
Key Topics
-
RADiscoveryAgent Device Type Identified by
urn:schemas-upnp-org:device:RADiscoveryAgent:1, this device acts as both an information synchronizer and discovery relay across remote networks. -
RADASync Service Central to the device, the RADASync service handles the synchronization of UPnP device discovery data between local control points and their remote counterparts.
-
Control Point Functionality Each RADiscoveryAgent includes a control point that pushes local UPnP device discovery information to its peer on the remote network and receives remote discovery data to replicate in the local environment.
-
Multicast Event Propagation The device supports forwarding multicast events from remote networks, allowing event-driven UPnP communications to function uninterrupted across network boundaries.
-
Visibility & Network Interface RADiscoveryAgent devices are only visible on the Remote Access (RA) network interfaces and should not be discoverable on the local LAN interfaces, ensuring proper network segmentation.
-
Device Architecture The device architecture integrates RADASync service and control point alongside listener and relay capabilities, actively managing discovery synchronization on the RA network interface.
Applications
-
Remote Network Device Discovery Enterprises and residential users benefit from unified device visibility when managing smart home devices or networked equipment across geographically separated networks.
-
Cross-Network Automation and Control By propagating discovery and event data, remote users can control and automate devices as if they were on the same local network, enhancing usability for IoT, smart devices, and media servers.
-
Network Management and Monitoring Service providers and IT administrators can reliably monitor device status and manage device interactions remotely, simplifying support and troubleshooting.
-
Secure Remote Access Solutions While this standard does not address access control itself, it supports the infrastructure that enables secure, efficient remote device discovery as part of larger remote access frameworks.
Related Standards
-
UPnP Device Architecture (UPnP-arch) Version 1.0 The foundation specification for UPnP devices and control points, detailing the core architecture used by the RADiscoveryAgent. Available at UPnP.org
-
RADASync Service Specification The service protocol implemented by RADiscoveryAgent to synchronize discovery information between peer devices over remote networks.
-
Remote Access Architecture (RAArchitecture) Defines the overall framework for remote access networking and device interaction which RADiscoveryAgent devices operate within.
-
Remote Access Server (RAServer) Device Specification Describes the peers on the home network side that interact with remote clients through RADiscoveryAgent functionality.
Summary
ISO/IEC 29341-18-4:2011 enables transparent, standardized remote discovery and event propagation for UPnP devices across network boundaries, addressing key challenges in cross-network device integration. By leveraging RADASync services and control point interoperation, the standard provides a robust basis for remote monitoring, control, and automation in interconnected environments. Adherence to this standard ensures interoperability among devices supporting remote access protocols and enhances the UPnP ecosystem for distributed networked device discovery.
Keywords: UPnP device architecture, Remote Access Discovery Agent, RADASync service, remote network synchronization, multicast event propagation, device discovery standards, UPnP remote control, ISO/IEC 29341-18-4, remote device management
Технические детали
- Технический комитет
- ISO/IEC JTC 1 - Information technology
- SKU
- ISO/IEC 29341-18-4:2011
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…