ISO/IEC 7816-12:2005 PDF

Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures

Название (английский):

ISO/IEC 7816-12:2005

Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 50
Дата публикации:: 4 октября 2005 г.
Издание:: ISO/IEC IS 7816 edition 1 version 1
ICS:: 35.240.15

Тип поставки:

Full version750 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:9 раб. дн. (перевод)

Цена:750 €

Описание (английский):

ISO/IEC 7816-12:2005 specifies the operating conditions of an integrated circuit card that provides a USB interface. An integrated circuit card with a USB interface is named USB-ICC. ISO/IEC 7816-12:2005 specifies the electrical conditions when a USB-ICC is operated by an interface device - for those contact fields that are not used, when the USB interface is applied; the USB standard descriptors and the USB-ICC class specific descriptor; the data transfer between host and USB-ICC using bulk transfers or control transfers; the control transfers which allow two different protocols named version A and version B; the (optional) interrupt transfers to indicate asynchronous events; status and error conditions. ISO/IEC 7816-12:2005 provides two protocols for control transfers. This is to support the protocol T=0 (version A) or to use the transfer on APDU level (version B). ISO/IEC 7816-12:2005 provides the state diagrams for the USB-ICC for each of the transfers (bulk transfers, control transfers version A and version B). Examples of possible sequences which the USB-ICC must be able to handle are given in an informative annex.

Технические детали

Технический комитет: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
SKU: ISO/IEC 7816-12:2005

Abstract

Overview

ISO/IEC 7816-12:2005 defines the electrical interface and operating procedures for integrated circuit identification cards that provide a USB interface (called USB-ICC). The standard specifies how a card with contacts maps USB signals to the card contact fields, the required USB descriptors, class-specific descriptors, supported data-transfer methods (bulk, control and optional interrupt transfers), two control-transfer protocols (Version A and Version B) and the state diagrams and status/error reporting required for reliable host–card interaction.

Key Topics

USB-ICC electrical mapping: assignment of card contacts (notably C1, C5, C4 and C8) to USB signals (VBUS, GND, D+, D-). Cards designed for one interface (USB or ISO/IEC 7816-3) must not be damaged when activated under the other.
Contact isolation rules: contacts not used for USB must be electrically isolated; interface devices that do not support USB must keep AUX1/AUX2 isolated or ensure voltages remain between –0.3 V and Vcc +0.3 V.
USB descriptors: mandatory standard device/configuration/interface/endpoint descriptors plus a class-specific descriptor for USB smart-card devices so hosts can enumerate and load appropriate drivers.
Data transfer modes:
- Bulk transfers for general data exchange and ATR transmission.
- Control transfers with two protocol variants:
  - Version A - supports Protocol T=0.
  - Version B - supports transfer at APDU level.
- Optional interrupt transfers to signal asynchronous or “virtual insertion/removal” events.
Protocols, status and error handling: state diagrams for each transfer type and informative annexes with example sequences the USB-ICC must handle.

Applications and Users

ISO/IEC 7816-12 is essential for manufacturers and integrators working with USB-enabled smart cards, including:

Smart card manufacturers designing USB tokens, eID cards, or USB-contact hybrid cards.
Firmware and driver developers implementing CCID/USB smart-card drivers and host-side software.
System integrators and vendors of USB card readers and USB connection devices.
Payment, government ID, access control and authentication solution providers adopting USB smart-card form factors.
Test labs and certification bodies verifying interoperability, descriptor correctness, transfer handling and error conditions.

Adopting ISO/IEC 7816-12 ensures consistent USB enumeration, reliable APDU or T=0 transport, and predictable behavior across hosts and USB-ICC implementations.

Related Standards (if applicable)

ISO/IEC 7816 series (Parts 1–11, 15) - physical, electrical and command-level rules for integrated circuit cards
ISO/IEC 7816-2 (contact locations) and ISO/IEC 7816-3 (electrical interface and transmission protocols)
USB Specification (Universal Serial Bus 2.0) and USB CCID (Chip/Smart Card Interface Device) class specification

Keywords: ISO/IEC 7816-12, USB-ICC, USB smart card, CCID, USB descriptors, bulk transfers, control transfers, APDU, smart card USB interface.

Overview

Key Topics

USB-ICC electrical mapping: assignment of card contacts (notably C1, C5, C4 and C8) to USB signals (VBUS, GND, D+, D-). Cards designed for one interface (USB or ISO/IEC 7816-3) must not be damaged when activated under the other.
Contact isolation rules: contacts not used for USB must be electrically isolated; interface devices that do not support USB must keep AUX1/AUX2 isolated or ensure voltages remain between –0.3 V and Vcc +0.3 V.
USB descriptors: mandatory standard device/configuration/interface/endpoint descriptors plus a class-specific descriptor for USB smart-card devices so hosts can enumerate and load appropriate drivers.
Data transfer modes:
- Bulk transfers for general data exchange and ATR transmission.
- Control transfers with two protocol variants:
  - Version A - supports Protocol T=0.
  - Version B - supports transfer at APDU level.
- Optional interrupt transfers to signal asynchronous or “virtual insertion/removal” events.
Protocols, status and error handling: state diagrams for each transfer type and informative annexes with example sequences the USB-ICC must handle.

Applications and Users

ISO/IEC 7816-12 is essential for manufacturers and integrators working with USB-enabled smart cards, including:

Smart card manufacturers designing USB tokens, eID cards, or USB-contact hybrid cards.
Firmware and driver developers implementing CCID/USB smart-card drivers and host-side software.
System integrators and vendors of USB card readers and USB connection devices.
Payment, government ID, access control and authentication solution providers adopting USB smart-card form factors.
Test labs and certification bodies verifying interoperability, descriptor correctness, transfer handling and error conditions.

Adopting ISO/IEC 7816-12 ensures consistent USB enumeration, reliable APDU or T=0 transport, and predictable behavior across hosts and USB-ICC implementations.

Related Standards (if applicable)

ISO/IEC 7816 series (Parts 1–11, 15) - physical, electrical and command-level rules for integrated circuit cards
ISO/IEC 7816-2 (contact locations) and ISO/IEC 7816-3 (electrical interface and transmission protocols)
USB Specification (Universal Serial Bus 2.0) and USB CCID (Chip/Smart Card Interface Device) class specification

Keywords: ISO/IEC 7816-12, USB-ICC, USB smart card, CCID, USB descriptors, bulk transfers, control transfers, APDU, smart card USB interface.

ISO/IEC 7816-12:2005 PDF

Технические детали

Abstract

Overview

Key Topics

Applications and Users

Related Standards (if applicable)

Похожие стандарты

Abstract

Overview

Key Topics

Applications and Users

Related Standards (if applicable)

Похожие стандарты

Information technology — Identification cards — Integrated circuit(s) cards with contacts — Part 3: Electroni…

Identification cards. Integrated circuit cards - Cards with contacts. Physical characteristics

Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations — A…

Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of th…