Name: ISO/IEC/IEEE 8802-15-6:2017 — Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-6: Wireless body area network
SKU: ISO/IEC/IEEE 8802-15-6:2017
Price: 25 EUR
Availability: InStock

Abstract

Overview - ISO/IEC/IEEE 8802-15-6:2017 (Wireless Body Area Network)

ISO/IEC/IEEE 8802-15-6:2017 (IEEE 802.15.6) specifies short-range wireless communications in the vicinity of, or inside, a human body - commonly known as a Wireless Body Area Network (BAN / body area network). The standard targets extremely low‑power, reliable links using existing ISM bands and medical/regulatory frequency bands, with support for quality of service (QoS) and data rates up to 10 Mbps. It also addresses safety and coexistence requirements such as non‑interference rules and radiation shaping to control specific absorption rate (SAR).

Key Topics and Technical Requirements

Scope & radio bands: Operation in ISM bands and frequency bands approved by national medical or regulatory authorities.
Power and performance: Design targets for extremely low power consumption while supporting data rates up to 10 Mbps and QoS mechanisms for latency-sensitive traffic.
Interference and coexistence: Strict non‑interference guidelines to protect medical equipment and other spectrum users.
Antenna and propagation effects: Requirements and considerations for portable antennas affected by proximity to the body (male/female, body shape variations) and by user motion.
Safety (SAR): Radiation pattern shaping and constraints to minimize specific absorption rate (SAR) into the body.
Robustness to motion: Provisions for changes in RF characteristics caused by user movement and posture.

Practical Applications - Who Uses This Standard

ISO/IEC/IEEE 8802-15-6:2017 is applicable to designers, manufacturers, and integrators working on:

Medical and health monitoring: wearable sensors, implantables, remote patient monitoring systems where low power and safety are critical.
Consumer wearables: fitness trackers, smart clothing and personal area networks requiring reliable on‑body connectivity and QoS.
Telemedicine and assisted living: devices that transmit physiological data with low latency and regulatory compliance.
Device and antenna designers: engineers addressing antenna placement, pattern shaping, SAR mitigation, and body‑proximity effects.
Regulators and test labs: for evaluating coexistence, SAR compliance, and certification against industry guidelines.

Related Standards & Considerations

Part of the IEEE 802.15 family (personal/short-range networks) and adopted as an ISO/IEC/IEEE document through ISO/IEC JTC 1 SC 6.
Implementers should review national regulatory rules for medical frequency bands and consider patent/licensing and certification processes as noted by IEEE.

Keywords: ISO/IEC/IEEE 8802-15-6:2017, Wireless Body Area Network, BAN, body area network, IEEE 802.15.6, QoS, ISM bands, SAR, low power, on-body communications.

ISO/IEC/IEEE 8802-15-6:2017 PDF

Похожие стандарты

Abstract

Overview - ISO/IEC/IEEE 8802-15-6:2017 (Wireless Body Area Network)

Key Topics and Technical Requirements

Practical Applications - Who Uses This Standard

Related Standards & Considerations

Технические детали

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines

ISO/ASTM52901-17(2023)

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts