ISO/TR 10982:2013 PDF

Name: ISO/TR 10982:2013 — Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags
SKU: ISO/TR 10982:2013
Price: 25 EUR
Availability: InStock

Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags

Название (английский):

ISO/TR 10982:2013

Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 15 ноября 2013 г.
Издание:: ISO TR 10982 edition 2 version 1
ICS:: 43.100

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

ISO/TR 10982:2013 outlines a number of test procedures that can be used for investigating the interactions that could occur between the deploying air bag and the occupant who is near the module at the time of deployment. Static and dynamic tests to investigate both driver and passenger systems are described. Comparative evaluation of the designs can be conducted using static tests. Favourable systems may be evaluated, if deemed necessary, by appropriate dynamic tests.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO/TR 10982:2013 - Road vehicles: Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags - is a Technical Report from ISO (second edition, 2013) that describes standardized static and dynamic test procedures to investigate interactions between deploying air bags and occupants who are near the module at the moment of deployment. The report focuses on driver and passenger systems, including specific guidance for adult and child Hybrid III dummies, sled pulses, instrumentation, data filtering and environmental conditions.

Key topics and technical requirements

Scope and purpose: Procedures to evaluate out‑of‑position occupant interaction with deploying air bags; comparative evaluation using static tests and optional dynamic validation for favourable systems.

Test dummies: Use of the Hybrid III family - 50th percentile male, “small female” and three‑year‑old child dummies (referenced to FMVSS part 572 subparts E, O and P).

Instrumentation & data: Recommended measurements include head and chest triaxial accelerations, head angular acceleration, neck forces/moments, rib/sternum deflections, pelvis accelerations and leg/femur loads where applicable. Data should be recorded and filtered per ISO 6487 and SAE J211.

Dummy conditioning: Dummy temperature control (≈20.6 °C to 22.2 °C after ≥4 h soak) and environmental considerations are specified.

Sled pulses: Two reference crash pulses are defined for sled testing:

Mild severity: half‑sine pulse ~ (8 ± 1) g, Δv (27 ± 2) km/h, duration (150 ± 5) ms (40–100 ms peak time range).
Moderate severity: half‑sine pulse ~ (13 ± 1) g, Δv (29 ± 2) km/h, duration (110 ± 5) ms (40–80 ms peak time range).

Test types: Static prepositioned tests and dynamic tests (acceleration‑induced or sled tests) for driver and passenger modules, with special provisions for child dummy positions near the instrument panel.

Applications

Vehicle and restraint system design validation for air bag safety and occupant protection.

Comparative evaluation of air bag module locations and designs (top/mid/low instrument panel deployments).

Sled laboratory testing to simulate pre‑crash braking and threshold deployments that cause out‑of‑position scenarios.

Supporting regulatory compliance assessment, safety audits and research into injury mechanisms from air bag deployments.

Related standards

ISO 6487:2012 - Measurement techniques in impact tests (instrumentation)

SAE J211, Part 1 - Instrumentation for impact test

FMVSS Part 572 subparts E/O/P - Hybrid III dummy specifications

Keywords: ISO/TR 10982:2013, air bag testing, out‑of‑position, Hybrid III dummy, sled pulse, static test, dynamic test, automotive safety testing.

ISO/TR 10982:2013 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications

Who should use it

Related standards

Технические детали

ISO 6487:2012

Road vehicles — Measurement techniques in impact tests — Instrumentation

ISO 6487:2015/Amd 1:2017

Road vehicles — Measurement techniques in impact tests — Instrumentation — Amendment 1

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies