ISO/TR 16178:2012 PDF
Footwear — Critical substances potentially present in footwear and footwear components
Footwear — Critical substances potentially present in footwear and footwear components
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Количество страниц:
- 41
- Дата публикации:
- 11 июля 2012 г.
- Издание:
- ISO TR 16178 edition 2 version 1
- ICS:
- 61.060
This Technical Report establishes a list of critical chemical substances potentially present in footwear and footwear components. This Technical Report describes the critical chemical substances, their potential risks, the materials in which they can be found and the test method(s) which can be used to quantify them. It does not include requirements; it is the responsibility of the user of this Technical Report to fix his/her level of acceptance, for instance using a defined concentration or detection limit or quantification limit. NOTE The proposed test methods indicate the state of the art. Some substances do not include a test method, as no test method is available at the time of publication of this Technical Report. If possible, it is intended to include a test method in a revision of this Technical Report. This Technical Report applies to any kind of footwear and footwear components.
Технические детали
- Технический комитет
- ISO/TC 216 - Footwear
- SKU
- ISO/TR 16178:2012
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…