ISO/TR 4137:1978 PDF
Plastics — Determination of modulus of elasticity by alternating flexure
Plastics — Determination of modulus of elasticity by alternating flexure
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Количество страниц:
- 7
- Дата публикации:
- 1 июня 1978 г.
- Издание:
- ISO TR 4137 edition 1 version 1
- ICS:
- 83.080.01
This report describes a method for the determination of the longitudinal moduls of elasticity of plastics by means of Savarts pendulum. The method is applicable to products for which the characteristic determined is greater than 1500 MPa and which it is possible to prepare specimens from 1 to 5 mm in thickness by cutting. The elasticity of the test piece is employed for the transmission of energy from one pendulum to another, the test piece being used as a support for both pendulums. The amplitude of the oscillations of the driving pendulum gradually decreases until it stops. The time between starting up and the first stopping of the driving pendulum is the half-oscillation period, which is a function of the longitudinal (Young's) moduls ofelasticity of the specimen in alternating flexure.
Технические детали
- Технический комитет
- ISO/TC 61/SC 2 - Mechanical behavior
- SKU
- ISO/TR 4137:1978
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…