ISO/TS 10839:2000 PDF
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Количество страниц:
- 35
- Дата публикации:
- 16 марта 2000 г.
- Издание:
- ISO TS 10839 edition 1 version 1
- ICS:
- 75.200
This Technical Specification presents a code of practice dealing with polyethylene (PE) pipes and fittings for buried pipeline systems outside buildings and designed to distribute gaseous fuels within the temperature range ? 20 °C to + 40 °C and gives appropriate temperature-related requirements. The code of practice covers mains and service lines whose components are prepared for jointing by scraping and/or machining, and gives instructions for the design, storage, handling, transportation, laying conditions and fusion quality control of PE pipes and fittings up to and including 630 mm outside diameter, as well as subsequent joint testing, backfilling, pipe system testing, commissioning and decommissioning. The jointing methods covered by this Technical Specification are heated-tool fusion jointing (butt, socket and saddle fusion), electrofusion jointing and mechanical jointing. No special precautions are necessary for areas exposed to the influence of mining and earthquakes other than those precautions mentioned in this code of practice. Existing and new national regulations take precedence over this Technical Specification.
Технические детали
- Технический комитет
- ISO/TC 138/SC 4 - Plastics pipes and fittings for the supply of gaseous fuels
- SKU
- ISO/TS 10839:2000
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…