ISO/TS 13399-72:2016 PDF

ISO/TS 13399-72:2016 defines the necessary text elements of a drawing frame and determines a standardized data exchange format. Therefore, the effort is reduced for the maintenance of documentation because the content of a drawing header is mated into a specific drawing frame by means of using XML technology and an individual mapping table. The benefit of this concept for manufacturer/supplier and end user is the advantage of a central maintenance of the appropriate templates. It covers the following: - identification and definition of the data fields; - identification and definition of the structure of the data fields; - structure of the data exchange file. The standardization of drawing formats, e.g. drawing frame, structure of the bill of material, are outside the scope of ISO/TS 13399-72:2016 which is rather more intended to standardize the data exchange of the product documentations. The following are outside the scope of ISO/TS 13399-72:2016; - layer settings as defined in ISO/TS 13399‑70; - structure of the tool documentation as defined in ISO/TS 13399‑71; - applications where these standard data may be stored or referenced; - concept of the classification of cutting tool data and their properties; - concept of the design of 2D drawings for cutting tools; - concept of the design of 3D models for cutting tools; - application data for the use of those cutting tools; - information about the reconditioning of cutting tools; - information about additional application and usage data (e.g. coolant supply).