Name: ISO/TS 17536-5:2018 — Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 5: Engine fractional efficiency test method and upstream distribution sampling method
SKU: ISO/TS 17536-5:2018
Price: 25 EUR
Availability: InStock

Overview - ISO/TS 17536-5:2018 (Aerosol separator engine fractional efficiency test)

ISO/TS 17536-5:2018 specifies standardized, repeatable test methods for evaluating blowby oil aerosol and the performance of aerosol separators and filtering devices using internal combustion engines. The Technical Specification covers the engine fractional efficiency test method and the upstream distribution sampling method for steady-state operation of both open and closed crankcase ventilation systems. It does not address transient flow conditions, separator lifetime, or legal conformity.

Key topics and technical requirements

Scope and purpose: Defines sampling and test procedures to measure particle size distribution and fractional separation efficiency of oil aerosols from engine blowby.
Sampling system design: Requires particle transport of >95% for 3 µm particles from probe inlet to particle counter; upstream and downstream sampling lines must be equal in length and geometry; metal tubing grounded.
Isokinetic sampling: Must be maintained within +0 / −10% at the nominal flow rate for both upstream and downstream probes.
Flow and measurement accuracy: Sampling flow through lines measured to within 5% (volumetric devices); upstream/downstream sampling flow should be

ISO/TS 17536-5:2018 PDF

Похожие стандарты

Abstract

Overview - ISO/TS 17536-5:2018 (Aerosol separator engine fractional efficiency test)

Key topics and technical requirements

Технические детали

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines

ISO/ASTM52901-17(2023)

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts