ISO/TS 18617:2025 PDF

Hand hole design principles and test methods for handheld packages

Название (английский):

ISO/TS 18617:2025

Hand hole design principles and test methods for handheld packages

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 11 сентября 2025 г.
Издание:: ISO TS 18617 edition 1 version 1
ICS:: 55.040

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

This document describes the ergonomic design criteria and test evaluation methods for the hand holes of handheld packages that are handled by human operators during the distribution and logistics process. This document is applicable to handheld packages with a maximum weight of up to 23 kg. This document does not cover all issues of safety, health, and the environment related to the handling of packages.

Технические детали

Технический комитет: ISO/TC 122 - Packaging
SKU: ISO/TS 18617:2025

Abstract

Overview

ISO/TS 18617:2025 - "Hand hole design principles and test methods for handheld packages" provides ergonomic design criteria and test evaluation methods for hand holes (pre‑cut handles) used on distribution packages handled by people. The Technical Specification applies to handheld packages with a maximum weight of up to 23 kg and focuses on reducing musculoskeletal risk and improving handling efficiency during logistics and distribution. It does not attempt to address all safety, health or environmental issues related to package handling.

Key Topics

Scope and terminology: Defines “handheld package” (≤ 23 kg) and “hand hole” consistent with ISO 21067‑1 vocabulary.
Design criteria:
- Hand holes intended primarily for vertical lifting by one or two adults (not for one‑handed pulling/pushing).
- Shape and edge design to avoid sharp perforations and to disperse pressure (examples include ordinary oval, long oval, half‑folded, triangular top‑arched shapes).
- Reinforcement options: composite moulds or handle tape to strengthen corrugated board around hand holes (note: composite moulds can affect recyclability).
- Placement guidance: to avoid weakening compressive strength, the top of the hand hole should be placed at least h ≥ H/3 from the box top (h = distance from top centre of hole to top of box; H = box height).
Caution and labeling:
- Use ISO 780 symbols and warning signs explaining correct hand hole use.
- Weight warning label requirements for units over 10 kg; recommended dimensions ≥ 30 mm and contrasting colours (examples: black for 10–

Overview

Key Topics

Scope and terminology: Defines “handheld package” (≤ 23 kg) and “hand hole” consistent with ISO 21067‑1 vocabulary.
Design criteria:
- Hand holes intended primarily for vertical lifting by one or two adults (not for one‑handed pulling/pushing).
- Shape and edge design to avoid sharp perforations and to disperse pressure (examples include ordinary oval, long oval, half‑folded, triangular top‑arched shapes).
- Reinforcement options: composite moulds or handle tape to strengthen corrugated board around hand holes (note: composite moulds can affect recyclability).
- Placement guidance: to avoid weakening compressive strength, the top of the hand hole should be placed at least h ≥ H/3 from the box top (h = distance from top centre of hole to top of box; H = box height).
Caution and labeling:
- Use ISO 780 symbols and warning signs explaining correct hand hole use.
- Weight warning label requirements for units over 10 kg; recommended dimensions ≥ 30 mm and contrasting colours (examples: black for 10–

ISO/TS 18617:2025 PDF

Технические детали

Abstract

Overview

Key Topics

Похожие стандарты

Abstract

Overview

Key Topics

Похожие стандарты

Packaging — Vocabulary — Part 1: General terms

Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies