ISO/TS 5733:2024 PDF
Plastics — Test method of exposure to white LED lamps
Plastics — Test method of exposure to white LED lamps
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 11
- Дата публикации:
- 6 сентября 2024 г.
- Издание:
- ISO TS 5733 edition 1 version 1
- ICS:
- 83.080.01
This document specifies a method for exposing test specimens to white light emitting diode (LED) lamps at specified temperatures and relative humidity. This document is applicable to coloured and uncoloured plastics that are exposed to white LED lamps in indoor environments such as homes, offices, retail outlets, factory and commercial facilities that do not experience solar radiation through window glass. It can be applicable to plastics in other environments as well.
Abstract
Overview
ISO/TS 5733:2024 - "Plastics - Test method of exposure to white LED lamps" defines a laboratory method for exposing plastic test specimens to white light‑emitting diode (LED) lamps under controlled temperature and relative humidity. The Technical Specification is intended for coloured and uncoloured plastics used in indoor environments (homes, offices, retail, factory and commercial facilities) where solar radiation through window glass is not present. The method helps assess LED‑induced material changes and estimate product life under common indoor LED lighting.
Key topics and technical requirements
- Light source: Use one or more white LED lamps (typically blue LED chip + phosphor). Report manufacturer, model, correlated colour temperature (CCT) and average colour‑rendering index (Ra).
- Typical lamp characteristics: Example specification - CCT 5000 K ± 250 K, Ra > 80; spectral irradiance in 300–400 nm must be
Технические детали
- Технический комитет
- ISO/TC 61/SC 6 - Ageing, chemical and environmental resistance
- SKU
- ISO/TS 5733:2024
Похожие стандарты
Другие стандарты ISO