PD CEN/TS 14999:2013 PDF
Adhesives for thermoplastic piping systems. Accelerated ageing test in storage container
Adhesives for thermoplastic piping systems. Accelerated ageing test in storage container
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 июня 2013 г.
- ICS:
- 83.180
- SKU:
- PD CEN/TS 14999:2013
Abstract
1 Scope This Technical Specification describes a method for an accelerated ageing test of an adhesive in its container. The result provides the manufacturer with an indication of the storage stability of the adhesive and container combination and their ability to retain adhesiv e properties. The method described is intended for solvent based adhesives for thermoplastic piping systems but may be applied to other adhesive types if appropriate. The method described in this Technical Specification does not give a correlation between the results obtained after the accelerated ageing test and after the shelf life of the adhesive at the ambient conditions defined by the manufacturer in the data sheet.
NOTE Some of the solvents used in adhesives applied for bonding pipe joints are highly flammable and may even cause explosion when heated (tetrahydrofurane). Therefore, the users of this standardneed to take special precautions when testing such adhesives according to the provisions of this standard which require prolongedheating of the container with the adhesive.
Похожие стандарты
Другие стандарты PD
PD 6605-2:1998
ОтменёнGuidance on methodology for assessment of stress-rupture data - Computing methods
PD ISO/TS 6226:2025
ДействующийHealth informatics. Reference architecture for syndromic surveillance systems for infectious diseases
1 Scope This document specifies a reference architecture for event-based syndromic surveillance systems for infectious diseases. The system reference architecture addresses architectural components i…
PD ISO/TS 17595:2025
ДействующийSolid biofuels. Characterization of wood chip fuels. Essential information for producers, suppliers and users
1 Scope This document provides guidance on the characterization of wood chips produced from raw materials, as defined in ISO 17225‑4 , for the following aspects: quality classes and specifications; s…
PD ISO/TS 4452:2025
ДействующийSpecification and demonstration of system reliability of single-use drug delivery systems
1 Scope This document addresses the specification and demonstration of capability and system reliability to successfully deliver a medicinal product as part of design verification and manufacture, ut…
PD ISO/TS 25271:2026
ДействующийAutomation systems and integration. Industrial digital twin interface architecture
1 Scope This document specifies the interface architecture of industrial digital twin systems, which is structured around three key elements: the digital twin, the physical twin and the interface tha…