PD CEN/TS 15901-15:2014 PDF
Road and airfield surface characteristics - Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAG
Road and airfield surface characteristics - Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAG
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 ноября 2014 г.
- ICS:
- 93.080.20
- SKU:
- PD CEN/TS 15901-15:2014
Abstract
1 Scope This Technical Specification describes a method only used on airports for determining the skid resistance of pavements by measurement of the longitudinal friction coefficient LFCI . The method provides a measure of the wet skid resistance properties of a bound surface by measurement of the longitudinal friction coefficient using a trailer with a standard slip ratio of 15 %. The slip ratio can be chosen between 0 % and 100 % for research application. The test tyre is dragged over a pre-wetted pavement under vertical force and constant speed conditions while the test tyre is parallel to the direction of motion. This Technical Specification covers the operation of the IMAG device. The skid resistance of a pavement is determined by friction measurements at different speeds. Tests can be performed between 40 km/h and 120 km/h but standard test speeds are 40 km/h, 65 km/h and 95 km/h. Low speed measurements asses the microtexture while high speed measurements asses the macrotexture . The skid resistance is reported as friction measurements at these speeds and by comparison with the minimum friction level.
Похожие стандарты
Другие стандарты PD
PD 6605-2:1998
ОтменёнGuidance on methodology for assessment of stress-rupture data - Computing methods
PD ISO/TS 6226:2025
ДействующийHealth informatics. Reference architecture for syndromic surveillance systems for infectious diseases
1 Scope This document specifies a reference architecture for event-based syndromic surveillance systems for infectious diseases. The system reference architecture addresses architectural components i…
PD ISO/TS 17595:2025
ДействующийSolid biofuels. Characterization of wood chip fuels. Essential information for producers, suppliers and users
1 Scope This document provides guidance on the characterization of wood chips produced from raw materials, as defined in ISO 17225‑4 , for the following aspects: quality classes and specifications; s…
PD ISO/TS 4452:2025
ДействующийSpecification and demonstration of system reliability of single-use drug delivery systems
1 Scope This document addresses the specification and demonstration of capability and system reliability to successfully deliver a medicinal product as part of design verification and manufacture, ut…
PD ISO/TS 25271:2026
ДействующийAutomation systems and integration. Industrial digital twin interface architecture
1 Scope This document specifies the interface architecture of industrial digital twin systems, which is structured around three key elements: the digital twin, the physical twin and the interface tha…