PD IEC TR 63304:2021 PDF

1   Scope This Technical Report describes the general principle and technical details of the methods of measurement of the DC magnetic properties of permanent magnet materials in an open magnetic circuit using a superconducting magnet (SCM). This method is applicable to permanent magnet materials, such as those specified in IEC 60404‑8‑1, the properties of which are presumed homogeneous throughout their volume. There are two methods:

– the SCM-Vibrating Sample Magnetometer (VSM) method;

– the SCM-Extraction method.

This document also describes methods to correct the influence of the self-demagnetizing field in the test specimen on the demagnetization curve measured in an open magnetic circuit. The magnetic properties are determined from the corrected demagnetization curve .

NOTE These SCM-methods can determine the magnetic properties of permanent magnet materials with coercivity higher than 2 MA/m. The methods of measurement in a closed magnetic circuit specified in IEC 60404‑5 can lead to significant measurement error due to saturation effects in the pole pieces of yoke for the magnetic materials with coercivity higher than 1,6 MA/m (see IEC 60404‑5).