PD IEC/TS 62782:2016 PDF
Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 марта 2016 г.
- ICS:
- 27.160
- SKU:
- PD IEC/TS 62782:2016
Abstract
What is PD IEC/TS 62782 -Photovoltaic (PV) modules about?
PD IEC/TS 62782 is a technical specification that provides a test method for performing a cyclic (dynamic) mechanical load test in which the module is supported at the design support points and a uniform load normal to the module surface is cycled in alternating negative and positive directions. This test can be performed at any module temperature within the normal operating temperature range. Since the results have been determined to depend on the module temperature during the application of the load it is critical to maintain the module at a constant temperature during the performance of this test. This technical specification has historically been applied to rigid modules. It cannot be applied to flexible modules unless they are designed to be mounted in a rigid manner. In which case, the cyclic (dynamic) mechanical load test can be applied to the flexible module in its rigid mounting system.
Who is PD IEC/TS 62782 -Photovoltaic (PV) modules for?
PD IEC/TS 62782 on photovoltaic modules is useful for:
PV module manufacturers PV power system manufacturers Photoelectric device manufacturers Solar energy engineering industry Product designers Quality assurance an...
Похожие стандарты
Другие стандарты PD
PD 6605-2:1998
ОтменёнGuidance on methodology for assessment of stress-rupture data - Computing methods
PD ISO/TS 6226:2025
ДействующийHealth informatics. Reference architecture for syndromic surveillance systems for infectious diseases
1 Scope This document specifies a reference architecture for event-based syndromic surveillance systems for infectious diseases. The system reference architecture addresses architectural components i…
PD ISO/TS 17595:2025
ДействующийSolid biofuels. Characterization of wood chip fuels. Essential information for producers, suppliers and users
1 Scope This document provides guidance on the characterization of wood chips produced from raw materials, as defined in ISO 17225‑4 , for the following aspects: quality classes and specifications; s…
PD ISO/TS 4452:2025
ДействующийSpecification and demonstration of system reliability of single-use drug delivery systems
1 Scope This document addresses the specification and demonstration of capability and system reliability to successfully deliver a medicinal product as part of design verification and manufacture, ut…
PD ISO/TS 25271:2026
ДействующийAutomation systems and integration. Industrial digital twin interface architecture
1 Scope This document specifies the interface architecture of industrial digital twin systems, which is structured around three key elements: the digital twin, the physical twin and the interface tha…