PD IEC/TS 62910:2015 PDF
Utility-interconnected photovoltaic inverters. Test procedure for low voltage ride-through measurements
Utility-interconnected photovoltaic inverters. Test procedure for low voltage ride-through measurements
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 ноября 2015 г.
- ICS:
- 27.160
- SKU:
- PD IEC/TS 62910:2015
Abstract
1 Scope This Technical Specification provides a test procedure for evaluating the performance of Low Voltage Ride-Through ( LVRT ) functions in inverters used in utility-interconnected PV systems. The technical specification is most applicable to large systems where PV inverters are connected to utility HV distribution systems. However, the applicable procedures may also be used for LV installations in locations where evolving LVRT requirements include such installations, e.g. single-phase or 3-phase systems. The assessed LVRT performance is valid only for the specific configuration and operational mode of the inverter under test. Separate assessment is required for the inverter in other factory or user-settable configurations, as these may cause the inverter LVRT response to behave differently. The measurement procedures are designed to be as non-site-specific as possible, so that LVRT characteristics measured at one test site, for example, can also be considered valid at other sites. This technical specification is for testing of PV inverters, though it contains information that may also be useful for testing of a complete PV power plant consisting of multiple inverters connected at a single point to the utility grid. It further provides a basis for utility-interconnected PV inverter numerical simulation and model validation.
Похожие стандарты
Другие стандарты PD
PD 6605-2:1998
ОтменёнGuidance on methodology for assessment of stress-rupture data - Computing methods
PD ISO/TS 6226:2025
ДействующийHealth informatics. Reference architecture for syndromic surveillance systems for infectious diseases
1 Scope This document specifies a reference architecture for event-based syndromic surveillance systems for infectious diseases. The system reference architecture addresses architectural components i…
PD ISO/TS 17595:2025
ДействующийSolid biofuels. Characterization of wood chip fuels. Essential information for producers, suppliers and users
1 Scope This document provides guidance on the characterization of wood chips produced from raw materials, as defined in ISO 17225‑4 , for the following aspects: quality classes and specifications; s…
PD ISO/TS 4452:2025
ДействующийSpecification and demonstration of system reliability of single-use drug delivery systems
1 Scope This document addresses the specification and demonstration of capability and system reliability to successfully deliver a medicinal product as part of design verification and manufacture, ut…
PD ISO/TS 25271:2026
ДействующийAutomation systems and integration. Industrial digital twin interface architecture
1 Scope This document specifies the interface architecture of industrial digital twin systems, which is structured around three key elements: the digital twin, the physical twin and the interface tha…