PD ISO/TR 27609:2007 PDF
Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 июля 2007 г.
- ICS:
- 13.160
- SKU:
- PD ISO/TR 27609:2007
Abstract
1 Scope This Technical Report presents an evaluation of a round-robin test of vibration measurement methods for determining vibration in hand-held grinders. The aim of the round-robin test was to establish a test method that could meet the requirement of ISO 20643 for measurement of vibration emissions in three directions, for accordance with the planned-to-be-revised ISO 8662‑4. The value obtained by such a test method must correspond to the highest vibration values likely to occur under typical and normal working conditions of the machine, i.e. the upper quartile of the vibration in real use. This acknowledges that the upper boundary of “typical and normal” conditions can be exceeded by some conditions of “real use”. Vibration at grinding can mainly be divided into vibration caused by unbalance of the grinding wheel and process vibration generated by the contact between the grinding wheel and the work piece. The unbalance part has been shown to be the greater of the two and ISO 8662‑4 is based on this. In this Technical Report, the test method consists of a number of averaged measurements using an unbalance disc, with an unbalance corresponding to the upper limit of the unbalances found among real grinding wheels. Whereas ISO 8662‑4 covers all types of hand-held grinders, the round-robin test presented in this Technical Report was based on grinding with depressed centre-wheels, one of the most common grinding applications. The types of grinder used in the round-robin test are given in Table 1.
Похожие стандарты
Упомянутые в описании и другие стандарты PD
ISO 20643:2005/Amd 1:2012
ДействующийMechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission…
Overview ISO 20643:2005/Amd 1:2012 is an amendment to the international standard governing the evaluation of mechanical vibration emitted by hand-held and hand-guided machinery. This amendment specif…
BS EN ISO 8662-4:1995
ОтменёнHand-held portable power tools. Measurement of vibrations at the handle - Grinding machines
PD 6605-2:1998
ОтменёнGuidance on methodology for assessment of stress-rupture data - Computing methods
PD ISO/TS 6226:2025
ДействующийHealth informatics. Reference architecture for syndromic surveillance systems for infectious diseases
1 Scope This document specifies a reference architecture for event-based syndromic surveillance systems for infectious diseases. The system reference architecture addresses architectural components i…
PD ISO/TS 17595:2025
ДействующийSolid biofuels. Characterization of wood chip fuels. Essential information for producers, suppliers and users
1 Scope This document provides guidance on the characterization of wood chips produced from raw materials, as defined in ISO 17225‑4 , for the following aspects: quality classes and specifications; s…
PD ISO/TS 4452:2025
ДействующийSpecification and demonstration of system reliability of single-use drug delivery systems
1 Scope This document addresses the specification and demonstration of capability and system reliability to successfully deliver a medicinal product as part of design verification and manufacture, ut…
PD ISO/TS 25271:2026
ДействующийAutomation systems and integration. Industrial digital twin interface architecture
1 Scope This document specifies the interface architecture of industrial digital twin systems, which is structured around three key elements: the digital twin, the physical twin and the interface tha…