PD ISO/TR 9464:2008 PDF

PD ISO/TR 9464 is a  technical report to help oil and gas sector measure flowrate in pipelines. PD ISO/TR 9464 answers some of important questions which might arise as a result of the application BS EN ISO 5167 series, in the measurement of flow rates in pipelines. The report will benefit the oil and gas sectors as it presents guidance on applying the rules and requirements of ISO 5167 based on theory and experimental work undertaken in the field of flow measurement. PD ISO/TE 9464 will help petroleum and gas shippers and producing, exporting and importing nations to get the best from ISO 5167:2003. The report provides guidance on the use of all parts of :2003. PD also gives supporting information for calculating the flowrate and its associated uncertainty measurement.  Also PD gives information on the use of secondary instrumentation, including measurement of pressure, differential pressure, temperature, density and electrical supply. :2003 is an international standard (in four parts) for flow measurement based on the differential pressure generated by a constriction introduced into a circular conduit. It covers the geometry and method of use (installation and operating conditions) of orifice plates, nozzles and Venturi tubes when they are inserted in a conduit running full to determine the flowrate of the fluid flowing in the conduit. It also gives necessary information for calculating the flowrate and its associated uncertainty. It presents a set of rules and requirements based on theory and experimental work undertaken in the field of flow measurement. Some clauses of :2003 (parts 1 to 4) are not commented upon and the corresponding clause numbers are omitted from this Technical Report, except when it has been thought to be useful to keep a continuous numbering of paragraphs. answers some important questions which might arise on the use of ISO...