Поиск

Water quality — Vocabulary — Amendment 1

Overview ISO 6107:2021/Amd 1:2026 - Water quality - Vocabulary - Amendment 1 is an official amendment to the core water quality vocabulary standard developed by the International Organization for Sta…

Rubber. Determination of metal content by atomic absorption spectrometry - Determination of lead content

What is ISO 6101-2 - Lead content in rubber about ? ISO 6101-2 is the first part of the multi-series standard that specifies an atomic absorption spectrometric method for the determination of the lea…

Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel

1 SCOPE AND FIELD OF APPLICATION This International Standard specifies a method of determining the apparent density, i.e. the mass per unit of volume, of loose moulding material that cannot be poured…

Water quality. Vocabulary - Part 5

Water quality. Vocabulary - Part 1

Scope This part of ISO 6107 defines terms used in certain fields of water quality characterization. NOTE In addition to the terms and definitions in the three official ISO lan­guages (English, French…

Coke. Determination of shatter indices

What is ISO 616 about? ISO 616 specifies a method for determining the strength of coke by the shatter test. The shatter index of a coke can be determined for one test sieve or for each number of test…

Rubber or plastics covered rollers. Specifications - Requirements for hardness

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-…

What is BS EN ISO 6149-1 - Connections for hydraulic fluid power and general use about? BS EN ISO 6149 is a series on hydraulic fluid power. Hydraulic fluid power is the use of fluids under pressure…

Photography. Micrographic films, spools and cores. Dimensions

Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods - Diffusion method

BS EN ISO 6145-8:2008 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Diffusion method BS EN ISO 6145-8 specifies a dynamic method for the preparation of calib…

Rotary-shaft lip-type seals incorporating elastomeric sealing elements - Identification of visual imperfectio…

1 Scope This part of ISO 6194 describes seals utilizing elastomeric sealing elements. They are normally considered suitable for use only at low pressures (see ISO 6194-1:2007, 6.1). This part of ISO…

Road vehicles. Braking of automotive vehicles and their trailers. Vocabulary

1 Scope This International Standard defines the principal terms used in relation to the braking and braking equipment of motor vehicles, trailers or combinations of these as defined in ISO 3833. The…

Shipbuilding. Trawl winches

Bonded abrasive products. Permissible unbalances of grinding wheels as delivered. Static testing

1 Scope This International Standard specifies the maximum permissible values of unbalances for bonded abrasive wheels with an outside diameter D ≥ 125 mm and maximum operating speed v s ≥ 16 m/s, in…

Securities and related financial instruments. International securities identification numbering system (ISIN)

1 Scope This International Standard provides a uniform structure for the identification of fungible and non- fungible securities and financial instruments (see Annex A) using a unique identification…

Rubber. Determination of metal content by atomic absorption spectrometry - Determination of magnesium content

1 Scope This document specifies an atomic absorption spectrometric method for the determination of the magnesium content of natural rubber latex concentrate, raw natural rubber and products made from…

Rubber. Determination of metal content by atomic absorption spectrometry - Determination of zinc content

What is ISO 6101-1 - Zinc content in rubber about ? ISO 6101-1 is the first part of the multi-series standard that specifies an atomic absorption spectrometric method for the determination of the zin…

Blanks for superabrasive cutting-off wheels - Hand-held cutting-off in building and civil engineering

Earth-moving machinery. Basic types. Identification and terms and definitions

1 Scope This International Standard gives terms and definitions and an identification structure for classifying earth-moving machinery designed to perform the following operations: — excavation; — lo…

Gas analysis. Preparation of calibration gas mixtures using dynamic methods - Critical flow orifices

1 Scope This document specifies a method for the dynamic preparation of calibration gas mixtures containing at least two gases (usually one of them is a complementary gas) from pure gases or gas pre-…

Water quality. Vocabulary - Part 8

Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws - F…

1 Scope This part of ISO 6162 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces app…

Pneumatic fluid power. Cylindrical quick-action couplings for maximum working pressures of 1 MPa, 1,6 MPa, an…

What is ISO 6150 - Pneumatic fluid power about? ISO 6150 discusses pneumatic fluid power. A pneumatic power system carries power by employing compressed gas, generally air, as a fluid for transmittin…

Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibrati…

BS EN ISO 6145-1:2008 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration BS EN ISO 6145-1 specifies the calibration methods involved in the…

Rotary shaft lip-type seals incorporating elastomeric sealing elements - Nominal dimensions and tolerances

1 Scope This part of ISO 6194 describes seals utilising elastomeric sealing elements. They are considered suitable for use under low-pressure conditions (see 6.1). This part of ISO 6194 shows seal ty…

Rotary shaft lip-type seals incorporating elastomeric sealing elements - Performance test procedures

1 Scope ISO 6194 describes seals utilizing elastomeric sealing elements. They are considered suitable for use under low-pressure conditions (see ISO 6194-1:2007, 6.1). This part of ISO 6194 specifies…

Ships and marine technology. Toughened safety glass panes for rectangular windows and side scuttles. Punch me…

1 Scope This International Standard specifies a method for the non-destructive breaking reliability testing of toughened safety glass panes for windows and side scuttles complying with ISO 21005.

Abrasive products. Checking the grain size of superabrasives

1 Scope This International Standard specifies a method for determining or checking the grain size of superabrasives (diamond or cubic boron nitride) as used for the manufacture of industrial products…

Micrographics. Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm. Operating procedur…

1 Scope This International Standard specifies procedures that enable a camera operator to produce microfilm of appropriate quality of presentation and legibility, capable of yielding scanned images o…

Micrographics. Vocabulary - Materials and packaging

Laminated products made of bamboo strips for indoor furniture purposes. Requirements and test methods

1 Scope This document specifies the requirements and test methods for laminated products made of bamboo strips for indoor furniture purposes. It also specifies handling, storage, packaging and markin…

Water quality. Vocabulary - Part 3

Hydraulic fluid power. Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25…

1 Scope This document gives general and dimensional specifications for flanged heads, flange clamps, ports and mounting surfaces applicable to four-screw, one-piece square flange clamp type tube conn…

Rubber. Determination of metal content by atomic absorption spectrometry - Determination of manganese content

1 Scope This part of ISO 6101 specifies an atomic absorption spectrometric method for the determination of the manganese content of rubbers. The method is applicable to raw rubber and rubber products…

Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods - Capillary calibratio…

Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures

1 Scope This International Standard provides methods for determining the composition of a calibration gas mixture by comparison with appropriate reference gas mixtures, calculating the uncertainty of…

Fertilizers and soil conditioners. Liquid methylene-urea slow release fertilizers. General requirements

1 Scope This document specifies general requirements, analytical methods, sampling and preparation of test sample, marking and labelling, packaging, transport and storage for liquid methylene-urea sl…

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-…

Financial services. International securities identification number (ISIN)

What is ISO 6166 about? ISO 6166 discusses international securities identification number (ISIN). ISO 6166 provides a uniform structure for the identification of financial instruments as well as refe…

Rubber hoses and hose assemblies for saturated steam. Specification

What is ISO 6134 - Assembling of steam hoses about? ISO 6134 is an international standard used for rubber hoses. ISO 6134 is a best practice guide in testing and assembling of steam hoses. ISO 6134 s…

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring seali…

1 Scope This document specifies dimensions and performance requirements for external hex and internal hex port plugs for use with ISO 6149‑1 ports. Port plugs in accordance with this document can be…

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-…

Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum b…

1 Scope This International Standard specifies performance tests of brake cups and seals for hydraulic braking systems for road vehicles. It does not include requirements relating to chemical composit…

Rubber. Determination of metal content by atomic absorption spectrometry - Determination of manganese content

1 Scope This document specifies an atomic absorption spectrometric method for the determination of the manganese content of rubbers. The method is applicable to raw rubber and rubber products having…

Superabrasive products. Rotating grinding tools with diamond or cubic boron nitride. General survey, designat…

Micrographics. Vocabulary - Computer micrographics

Water quality. Vocabulary - Part 6

Scope This part of ISO 6107 defines terms used in certain fields of water quality characterization. NOTE In addition to the terms and definitions in the three official ISO lan­guages (English, French…

Inflatable boats - Boats with a hull length less than 8 m with a motor rating of 15 kW and greater

What is this standard about? This part of ISO 6185 specifies the minimum safety characteristics required for the design, materials to use, manufacture and testing of inflatable boats and rigid inflat…

Gas analysis. Preparation of calibration gas mixtures using dynamic methods - Piston pumps

1 Scope ISO 6145 comprises a series of International Standards dealing with various dynamic methods used for the preparation of calibration gas mixtures. This part of ISO 6145 describes a method and…

Water quality. Vocabulary - Part 7

Scope This part of ISO 6107 defines terms used in certain fields of water quality characterization. NOTE In addition to the terms and definitions in three of the official ISO languages (English, Fren…

Rubber or plastics covered rollers. Specifications - Surface characteristics

Rotary shaft lip-type seals incorporating elastomeric sealing elements - Storage, handling and installation

1 Scope This part of ISO 6194 describes seals utilizing elastomeric sealing elements. They are considered suitable for use under low-pressure conditions; see ISO 6194-1:2007, 6.1. This part of ISO 61…

Micrographics. Vocabulary - Quality of images, legibility, inspection

Road vehicles. Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hy…

1 Scope This International Standard specifies performance tests for moulded rubber boots used at end closures on drum-type wheel brake cylinders; these boots are designed to prevent the entrance of d…

Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods - Saturation method

Micrographics. Vocabulary - General terms

Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods - Permeation method

Ships and marine technology. Magnetic compasses, binnacles and azimuth reading devices. Class B

Micrographics. Vocabulary - Equipment

Plastics. Determination of pourability

1 Scope This International Standard specifies two methods, A and B, for determining the pourability of plastics in powdered and granular form by measuring the flow time through a funnel. From method…