SIST EN 27627-2:2000 PDF

Name: SIST EN 27627-2:2000 — Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983)
SKU: SIST EN 27627-2:2000
Price: 43.71 EUR
Availability: InStock

Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983)

Название (английский):

SIST EN 27627-2:2000

Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 5
Дата публикации:: 1 декабря 2000 г.
ICS:: 77.040.30
Технический комитет:: SS SPL - Technical Board for the general field

Тип поставки:

Full version75 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:75 €

Описание (английский):

General requirements concerning the field of application, principle, interfering elements,aparatus, sampling and test report are given in ISO 7627-1. In low concentrations the determination of these elements is very critical.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты SIST

Overview

SIST EN 27627-2:2000, aligned with ISO 7627-2:1983, defines a standardized method for the chemical analysis of hardmetals through flame atomic absorption spectrometry (FAAS). This part of the standard focuses specifically on the quantitative determination of trace amounts of calcium, potassium, magnesium, and sodium within a concentration range from 0.001% to 0.02% (m/m). Given the low concentration levels involved, this standard highlights the critical precision and care needed in sample preparation, analysis, and reporting.

The standard is essential for industries dealing with powder metallurgy and hardmetal manufacturing, ensuring reliable and reproducible measurement of these elements, which can influence material properties and performance.

Key Topics

Scope and Field of Application Covers determination of Ca, K, Mg, and Na in hardmetals using FAAS, within specified low concentration ranges. It supplements the general requirements provided by ISO 7627-1, with emphasis on avoiding contamination during analysis.

Sample Preparation and Reagents Utilizes careful dissolution of approximately 1g test portions in controlled volumes of hydrofluoric and nitric acids, with additions of ammonium fluoride and cesium chloride to complex interfering ions. High-purity reagents and decontaminated equipment are critical.

Flame Atomic Absorption Spectrometry Setup Specifies instrumental parameters including optimal wavelengths for each element, oxidants, and sensitivity ranges. Calibration employs matrix-matched solutions and stock standards to ensure accuracy.

Calibration and Measurement Procedure Multiple calibration solutions with known concentrations are prepared alongside blank samples. Absorbance measurements are taken systematically, with at least two replicates per solution to guarantee reliability.

Calculation and Reporting of Results Element concentration is expressed as a mass percentage using a defined formula incorporating measured absorbance, dilution volume, and sample mass. Permissible deviations in repeated measurements enhance confidence in results.

Applications

Quality Control in Hardmetal Production Precise determination of Ca, K, Mg, and Na helps control impurities that may affect sintering, hardness, or corrosion resistance of tungsten carbide and cobalt-based hardmetals.

Powder Metallurgy Research and Development Enables detailed chemical profiling of powder blends to optimize compositions and improve mechanical properties.

Environmental and Process Monitoring Quantitative monitoring of alkali and alkaline earth metals that can influence equipment wear or powder behaviors during manufacturing.

Standardized Reporting in Commercial and Regulatory Contexts Provides a consistent framework for international laboratories and manufacturing plants to produce comparable and legally defensible analytical data.

Related Standards

ISO 7627-1: General Requirements in FAAS for Hardmetals Establishes the foundational principles, apparatus specifications, and sampling procedures for atomic absorption analysis in hardmetals.

Other Hardmetal Analytical Standards Covering different elements, alternative spectrometric methods, or complementary techniques like inductively coupled plasma (ICP).

Standards on Sampling and Sample Preparation Ensuring representative sample collection and preparation aligned with metallurgical quality assurance.

By adhering to SIST EN 27627-2:2000, laboratories ensure accurate, reproducible, and contamination-free analyses of trace metallic elements in hardmetals, fostering better product quality, process control, and compliance with international manufacturing standards. This contributes significantly to advancing the powder metallurgy and hardmetal industries globally.

SIST EN 27627-2:2000 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 7627-2:1983

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 2: Determination of calcium, po…

SIST EN 27627-1:2000

Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Part 1: General requirements (ISO 76…

SIST EN ISO 6338:2026

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

SIST-TP CEN ISO/ASTM TR 52958:2026

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

SIST EN ISO 41002:2026

Facility management - Development of the facility management organization (ISO 41002:2026)

SIST EN ISO 844:2026

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

SIST-TS CEN ISO/TS 17664-3:2026

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

SIST EN ISO 8980-4:2026

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…