SIST EN ISO 10534-1:2002 PDF

Name: SIST EN ISO 10534-1:2002 — Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996)
SKU: SIST EN ISO 10534-1:2002
Price: 73.76 EUR
Availability: InStock

Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996)

Название (английский):

SIST EN ISO 10534-1:2002

Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio (ISO 10534-1:1996)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 23
Дата публикации:: 1 декабря 2002 г.
ICS:: 17.140.01
Технический комитет:: AKU - Acoustics

Тип поставки:

Full version345 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:345 €

Описание (английский):

Specifies a method for the determination of the sound absorption coefficient, reflection factor, surface impedance or admittance of materials and objects. The values are determined by evaluation of the standing wave pattern of a plane wave in a tube, which is generated by the superposition of an incident sinusiodal plane wave with the plane wave reflected from the test object.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 10534-1:2001 (identical to ISO 10534-1:1996) specifies an impedance tube method using standing wave ratio for determining acoustic properties of materials and small test objects. The standard defines how to measure the sound absorption coefficient, sound pressure reflection factor, surface impedance and surface admittance for normal incidence by evaluating the standing wave pattern produced by the superposition of an incident plane wave and the wave reflected from a test sample mounted in a tube.

Key points:

Method assumes a plane wave in a straight, tightly fitted impedance tube.

Measurements are performed by locating pressure minima/maxima and computing the standing wave ratio (SWR).

Numerical evaluation is preferred; annexes provide corrections and verification procedures.

Key Topics and Requirements

Measurement quantities: sound absorption coefficient (α), reflection factor (r), normalized impedance (Z/Zo) and admittance (G·Zo).

Test geometry: sample must cover the tube cross-section; reference plane usually at sample surface.

Wave conditions: only plane-wave propagation (no higher modes) within the tube’s working frequency range - tube dimensions set the usable frequencies.

Data acquisition: measure amplitudes at pressure minima and maxima, and distance to first minimum to determine phase and magnitude of reflection.

Corrections & verification: annexes address attenuation corrections (thermal/frictional wall losses), equipment verification, and pressure‑release terminations.

Computation: formulae use complex quantities (phase and magnitude); numerical methods are specified rather than graphical techniques.

Practical Applications and Users

EN ISO 10534-1 is widely used for:

Material characterization of acoustic absorbers (porous, fibrous, foams).

R&D and product design where parameter studies require small sample sizes.

Quality control for absorber manufacturing and material specification.

Acoustic laboratories performing standardized normal‑incidence tests.

Acoustic consultants and building acoustics engineers needing normal-incidence impedance or for input into predictive models.

Users should note: results refer to normal incidence (plane wave) and may require transformation to estimate diffuse‑field absorption (see annex D) or comparison with reverberation‑room data (ISO 354).

Related Standards

ISO 10534-2 - impedance tube method using two microphones

ISO 354 - measurement of sound absorption in a reverberation room

ISO 266 - preferred frequencies for acoustic measurements

Keywords: acoustics, impedance tube, standing wave ratio, sound absorption coefficient, reflection factor, surface impedance, admittance, EN ISO 10534-1, ISO 10534-1, acoustic testing.

SIST EN ISO 10534-1:2002 PDF

Abstract

Похожие стандарты

Overview

Key Topics and Requirements

Practical Applications and Users

Related Standards

Технические детали

ISO 10534-1:1996

Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 1: Method u…

ISO 3548-1:2022/Amd 1:2024

Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and m…

BS EN ISO 10534-2:2023

Acoustics. Determination of acoustic properties in impedance tubes. Two-microphone technique for normal sound…

BS ISO 26683-3:2019

Intelligent transport systems. Freight land conveyance content identification and communication. Monitoring c…