SIST EN ISO 11269-1:2013 PDF
Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth (ISO 11269-1:2012)
Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth (ISO 11269-1:2012)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 24
- Дата публикации:
- 22 апреля 2013 г.
- ICS:
- 13.080.30
- Технический комитет:
- KAT - Soil quality
ISO 11269-1:2012 describes a method for the determination of the effects of contaminated soils or contaminated samples on the root elongation of terrestrial plants. This method is applicable to soils, soil materials, compost, sludge, waste or chemical testing. It is applicable to the comparison of soils of known and unknown quality and to the measurement of effects of materials (compost, sludge, waste) or chemicals deliberately added to the soil. The method is not intended to be used as a measure of the ability of the soil to support sustained plant growth.
Abstract
Overview - EN ISO 11269-1:2012 (Soil quality - Inhibition of root growth)
EN ISO 11269-1:2012 specifies a standardized phytotoxicity test for measuring the effect of contaminated soils, soil materials or added substances on the root elongation of terrestrial plants. The method compares root growth in a test soil or test mixtures (soil + compost, sludge, waste or chemicals) against a control (reference or standard soil) under controlled laboratory conditions. It is intended for ecotoxicological assessment and comparison of soil quality, not as a measure of long‑term crop productivity.
Keywords: EN ISO 11269-1:2012, soil quality, root growth inhibition, phytotoxicity test, ecotoxicological testing.
Key topics and technical requirements
- Test principle: Pregerminated seeds are grown in test and control substrates; root lengths are measured and statistically compared. Shoot height can be recorded as corroborative data.
- Applicable materials: Soils, soil materials, compost, sewage sludge, wastes, and chemicals added to soil.
- Test design elements:
- Selection of test plants and pregermination procedures.
- Use of reference soil, standard soil or site-specific control soil.
- Preparation of pots/vessels and controlled growing conditions (environmental control to ensure reproducibility).
- Methods for incorporating chemicals or materials into soil (annex guidance included).
- Data expression: Results can be reported as ECx (effective concentration reducing root elongation by x%) and NOEC (no-observed-effect concentration); mixtures often expressed as % dry mass.
- Validity and reporting: The standard defines validity criteria, measurement procedures, and required test report information.
- Supporting guidance: Annexes cover water‑holding capacity measurement, reference substance results, incorporation methods and example data.
Practical applications and target users
- Environmental testing laboratories performing soil quality and ecotoxicological assessments.
- Regulators and compliance bodies evaluating contaminated land, waste disposal on agricultural land, or sludge application.
- Remediation consultants and soil scientists assessing phytotoxic risks during brownfield reclamation, landfill capping or waste reuse.
- Research institutions studying pollutant impacts on terrestrial plant early growth.
Benefits: provides a reproducible, year‑round laboratory method for rapid screening of phytotoxic effects and for comparing soils or amendments.
Related standards
- ISO 11269-2 (emergence and early growth of higher plants)
- ISO 10381-6 (soil sampling for microbiological assessment)
- ISO 10390, ISO 10694, ISO 11260, ISO 11268-1/2, ISO 11277, ISO 11465, ISO/TS 20281 (referenced normative methods used alongside EN ISO 11269-1).
Use EN ISO 11269-1:2012 when you need a standardized, reproducible test for root growth inhibition to inform risk assessment, regulatory decisions or remediation planning for contaminated soils and soil amendments.
Технические детали
- SKU
- SIST EN ISO 11269-1:2013
Похожие стандарты
Стандарты, упомянутые в описании
ISO 11269-1:2012
ДействующийSoil quality — Determination of the effects of pollutants on soil flora — Part 1: Method for the measurement…
Overview ISO 11269-1:2012 - Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth - is an international standard th…
SIST EN ISO 11269-2:2013
ДействующийSoil quality - Determination of the effects of pollutants on soil flora - Part 2: Effects of contaminated soi…
Overview EN ISO 11269-2:2013 - "Soil quality - Determination of the effects of pollutants on soil flora - Part 2: Effects of contaminated soil on the emergence and early growth of higher plants" is a…
ISO 10381-6:1993
ОтменёнSoil quality — Sampling — Part 6: Guidance on the collection, handling and storage of soil for the assessment…
BS EN ISO 10390:2022
ДействующийSoil, treated biowaste and sludge. Determination of pH.
SIST ISO 10694:1996
ДействующийSoil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
Overview ISO 10694:1995 - "Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)" specifies a laboratory method for measuring total carbon in air-dried s…
SIST EN ISO 11260:2018
ДействующийSoil quality - Determination of effective cation exchange capacity and base saturation level using barium chl…
Overview EN ISO 11260:2018 - published by CEN as the European adoption of ISO 11260:2018 - specifies a laboratory method to determine the effective cation exchange capacity (CEC) of soils at the soil…
BS EN ISO 11268-1:2015
ДействующийSoil quality. Effects of pollutants on earthworms. Determination of acute toxicity to Eisenia fetida/Eisenia…
SIST ISO 11277:2020
ДействующийSoil quality - Determination of particle size distribution in mineral soil material - Method by sieving and s…
Overview SIST ISO 11277:2020 - Soil quality: Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation defines a standardized laboratory procedure to…