Overview
SIST EN ISO 11668:2002 specifies general test methods for chlorinated polymerization resins used as binders in paints and varnishes. This European Standard, identical with the international ISO 11668:1997, is managed by CEN Technical Committee 139 and provides standardized testing procedures for:
- Chlorinated rubber resins
- Vinyl chloride copolymers
These materials are essential components in coatings, offering specific chemical and physical properties crucial for paint and varnish performance. The standard ensures consistent evaluation of these binders across industries and labs, aiding quality control and product development.
Key Topics
1. Scope of Testing
EN ISO 11668 outlines test methods for two main chlorinated resins used as paint binders:
- Chlorinated rubber with chlorine content of 64% to 68%
- Vinyl chloride copolymers predominantly composed of polyvinyl chloride
2. Testing Parameters
The standard defines procedures for determining essential characteristics:
-
Colour Number
- Assessed by dissolving samples and measured using the Gardner colour scale (ISO 4630).
- For very light samples (Gardner < 1), the Platinum-cobalt scale (ISO 6271) is used.
-
Viscosity
- Measured on resin solutions following ISO 3219 using rotational viscometers.
- Factors influencing viscosity include solution temperature, stirring rate, and dissolution time.
- Alternative method using falling-ball viscometer (ISO 12058-1) may be agreed upon.
-
Density
- Determined by gas comparison pyknometer per ISO 8130-2.
-
Chlorine Content
- High chlorine content (>50% m/m) tested according to ISO 1158.
- Lower chlorine content measured via the Wickbold combustion method detailed in Annex A of the standard.
3. Sampling and Reporting
- Representative sampling follows ISO 842.
- Test reports must document product identification, test methods, solvents used, solution concentrations, measurement conditions, test results, and any deviations.
Applications
This standard is pivotal for industries involved in manufacturing and quality control of paints and varnishes containing chlorinated binders. Its practical applications include:
-
Quality Assurance
Ensuring consistent resin performance through standardized viscosity, colour, density, and chlorine content assessments.
-
Product Development
Facilitating comparative analysis of raw materials and binders to optimize paint formulations for durability, appearance, and chemical resistance.
-
Regulatory Compliance
Providing a uniform testing framework that supports conformity to European and international requirements within coatings industries.
-
Supplier and Material Evaluation
Enabling purchasers and manufacturers to specify and verify chlorinated polymer resin quality reliably.
Related Standards
EN ISO 11668 references several important standards supporting its test methods:
- ISO 842:1984 – Sampling methods for raw materials in paints and varnishes.
- ISO 1158:1998 – Determination of chlorine content in vinyl chloride polymers.
- ISO 3219:1993 – Viscosity measurement of polymers in liquid states using rotational viscometers.
- ISO 4630:1997 – Gardner colour scale for colorimetry of clear liquids.
- ISO 6271:1997 – Platinum-cobalt colour scale for clear liquids.
- ISO 8130-2:1992 – Density measurement by gas comparison pyknometer.
- ISO 12058-1:1997 – Viscosity measurement using falling-ball viscometers.
Implementing EN ISO 11668 alongside these standards ensures comprehensive characterization and traceability of chlorinated polymer binders in coatings.
Keywords: EN ISO 11668, chlorinated polymerization resins, binders for paints, chlorinated rubber, vinyl chloride copolymers, general methods of test, paint binder testing, viscosity measurement, resin colour number, chlorine content determination, standard test methods for paints, coatings quality control, CEN paint standards.