SIST EN ISO 12780-1:2011 PDF

Overview

EN ISO 12780-1:2011 (ISO 12780-1:2011) is a Geometrical Product Specification (GPS) standard that defines the vocabulary and parameters related to straightness of individual integral features. It covers complete straightness profiles only and establishes unambiguous terms and concepts needed to specify and verify straightness in engineering metrology. This part is the vocabulary/parameter specification (Part 1) and is complemented by ISO 12780-2, which defines specification operators.

Key Topics

• Scope and purpose
  • Definitions for straightness of integral features (complete straightness profiles).
  • Clarifies extraction and filtering concepts that affect straightness evaluation.
• Fundamental terms
  • Straightness, straightness plane, extracted line, and straightness profile.
  • Relationship between the real surface, the straightness plane and the digital extracted line.
• Reference lines and fit conventions
  • Minimum zone reference lines (MZ): inner, outer, and mean MZ lines.
  • Least squares reference line (LS) and associated notation (e.g., prefix G for LS-based parameters).
• Parameters of straightness
  • Peak-to-valley straightness deviation (defined for all reference lines).
  • Peak-to-reference and reference-to-valley deviations (defined for least squares reference).
• Filter and signal processing
  • Role of profile filters, cut-off wavelength, and transmission band (usually 50% definition).
  • Notes on phase-correct mean line filters (ISO 11562) and possibility of additional filtering methods.
• Annexes and supporting material
  • Mathematical definitions for tolerances, synoptic tables, and relationship to the GPS matrix model.

Applications

• Ensures consistent use of terminology and parameters for specifying straightness in:
  • Precision manufacturing (machined components, shafts, rails).
  • Automotive, aerospace, medical devices and other safety-critical industries.
  • Calibration and testing laboratories, coordinate measuring machine (CMM) software, and inspection reports.
• Useful for:
  • Metrologists, quality engineers, design engineers, inspection technicians.
  • Standards authors and software/tool vendors implementing GPS-compliant measurement algorithms.

Related Standards

• ISO 12780-2:2011 - Straightness: Part 2, Specification operators (defines extraction conventions and operators).
• ISO 11562 - Surface texture filters (phase-correct mean line filters).
• ISO 14660-1 / ISO 14660-2 - GPS general terms and extracted features.
• ISO 17450-1 - GPS general concepts and model for specification/verification.
• Note: Straightness of an extracted derived axis of a cylinder is treated in ISO 12180-1 and ISO 12180-2.

This standard is essential for consistent, GPS-compliant specification and measurement of straightness. Use keywords: ISO 12780-1, straightness, geometrical product specifications, GPS, straightness profile, minimum zone, least squares, peak-to-valley, metrology standard.