SIST EN ISO 13000-2:2021 PDF

Name: SIST EN ISO 13000-2:2021 — Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
SKU: SIST EN ISO 13000-2:2021
Price: 65.56 EUR
Availability: InStock

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)

Название (английский):

SIST EN ISO 13000-2:2021

Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 17
Дата публикации:: 14 сентября 2021 г.
Издание:: ISO/FDIS 13000-2:2021
ICS:: 83.140.01

Тип поставки:

Full version255 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:255 €

Описание (английский):

This document specifies the preparation of test specimens and gives the test methods applicable to semi-finished products of polytetrafluoroethylene (PTFE).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

SIST EN ISO 13000-2:2021 outlines the standardized procedures for preparing test specimens and determining key physical and mechanical properties of semi-finished products made from polytetrafluoroethylene (PTFE). Published by the European Committee for Standardization (CEN), this document ensures consistency in sample preparation and testing protocols across laboratories and industries working with PTFE plastics.

Semi-finished PTFE products include materials such as sheets, rods, tubes, and tapes, widely used in industrial and engineering applications due to their exceptional chemical resistance, low friction, and thermal stability. Applying this standard enables reliable material assessment and comparison, supporting product quality, regulatory compliance, and innovation.

Key Topics

Scope and Terminology

Defines the document's coverage, focusing on the preparation of test specimens and applicable PTFE testing methods.
References standard industry terminology from ISO 472 and ISO 13000-1 for clarity and consistency.

Sampling and Test Specimen Preparation

Details statistical sampling methods to ensure representative material selection.
Specifies that test specimens must be prepared directly from or machined from semi-finished PTFE products, avoiding any additional processing such as moulding.

Physical and Mechanical Property Testing

Linear Dimensions: Measured in accordance with ISO 1923.
Tensile Properties: Tested per ISO 527-2 and ISO 527-3 with special PTFE-compatible specimen shapes and preparation guidelines.
Density: Determined using ISO 1183 methods.
Loss in Mass at 300°C: Evaluates thermal stability and purity.
Dimensional Stability: Assessed via heating and subsequent measurement, including special methods for thick-walled tubes.
Dielectric Strength: Critical for electrical insulation, tested according to IEC 60243.
Hardness: Evaluated using ball indentation (ISO 2039-1) or Shore D (ISO 868).
Colour and Whiteness: Visually or instrumentally measured using recognized colorimetry standards.
Environmental Stress Cracking (ESC): Determined following ISO 22088 methods.

Applications

Implementing SIST EN ISO 13000-2:2021 is essential for:

Material Characterization and Quality Control

Ensuring consistent mechanical and physical property evaluation for PTFE semi-finished products such as sheets, rods, tubes, and tapes.

Product Development and Compliance

Supporting the design and validation of high-performance PTFE components in industries like chemical processing, electrical engineering, food equipment, and medical devices.
Demonstrating conformity to international and European regulations and client requirements.

Supplier and Customer Assurance

Enabling clear communication of PTFE material properties and performance across global supply chains.
Facilitating acceptance testing and benchmarking of delivered goods.

Related Standards

The following international standards are referenced in or closely related to SIST EN ISO 13000-2:2021:

ISO 472: Plastics - Vocabulary

ISO 527 (Parts 2 and 3): Determination of tensile properties

ISO 868: Indentation hardness by durometer

ISO 1183: Determining density of non-cellular plastics

ISO 1923: Determination of linear dimensions

ISO 2039-1: Ball indentation hardness

ISO 3611: Dimensional measuring equipment (micrometers)

ISO 22088: Environmental stress cracking (ESC)

IEC 60243: Electrical strength of insulating materials

CIE 1931, CIE 1964, CIE Publication 15: Colorimetry

Organizations working with PTFE semi-finished products should integrate SIST EN ISO 13000-2:2021 with these related standards to ensure comprehensive compliance and compatibility across all critical testing and assessment activities. This integrated approach promotes high-quality, reliable PTFE materials for demanding industrial applications.

SIST EN ISO 13000-2:2021 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 13000-2:2021

Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and…

ISO 472:2013/Amd 1:2018

Plastics — Vocabulary — Amendment 1: Additional items

BS EN ISO 13000-1:2021

Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Requirements and designation.

BS EN ISO 19232-5:2018

Non-destructive testing. Image quality of radiographs. Determination of the image unsharpness and basic spati…

SIST EN ISO 527-2:2025

Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics…

SIST EN ISO 527-3:2019

Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018)

BS EN ISO 11833-1:2019

Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics for sheets of thic…

IEC 60243-3:2013

Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impu…