SIST EN ISO 13503-6:2014 PDF

Overview

EN ISO 13503-6:2014 - "Petroleum and natural gas industries - Completion fluids and materials - Part 6" defines a standardized laboratory procedure for measuring leakoff (dynamic fluid loss) of completion fluids. The standard provides a consistent methodology to simulate circulation and fluid loss at a core face under dynamic conditions, where shear and flow alter filter-cake formation and filtrate behaviour. It is applicable to all completion fluids except fluids that chemically react with porous media.

Keywords: EN ISO 13503-6:2014, completion fluids, dynamic fluid loss, leakoff testing, petroleum and natural gas.

Key topics and technical requirements

• Scope and applicability: Dynamic leakoff testing for completion fluids (excludes fluids that react with porous media).
• Cell types: Defines two principal test cells - round cell and proppant conductivity cell - with schematics and port identification for inlet/outlet, core placement, gap and leakoff outlet.
• Test parameters:
  • Temperature control: Fluid and cell temperatures measured to ±1 °C and stabilized to within ±3 °C of test temperature.
  • Pressure control: Test (differential) pressure controlled to within ±5% of design pressure; fluid pressure/backpressure definitions provided.
  • Shear rate and shear-history: Shear rate selection and optional shear-history simulator to reproduce field-like shear exposure.
  • Permeability considerations: Notes on dynamic effects for low-permeability (< 1.0 mD) and high-permeability (> 50 mD) formations.
• Test procedure: Core preparation, cell assembly (round and proppant cells), run procedures and filtrate collection.
• Calculations and reporting:
  • Derivation of leakoff coefficients using quadratic regression with time and square-root-of-time variables.
  • Shear rate calculations, calculation examples, and recommended content for test reports.
• Calibration and instrumentation: All calibrations to follow manufacturer recommendations; precision and units guidance (SI with optional USC units).

Applications and users

This standard is used to:

• Evaluate completion fluid performance related to fluid loss and filter-cake formation under flowing/sheared conditions.
• Support selection and optimization of completion and stimulation fluids for drilling, fracturing, gravel-pack and well-completion operations.
• Provide reproducible lab data for R&D, product development, quality control and technical acceptance.

Primary users:

• Petroleum and natural gas service companies, completion fluid manufacturers and testing laboratories.
• Drilling/completion engineers, reservoir engineers and laboratory technicians involved in fluid selection and well-treatment design.

Related standards

• ISO 13503 series (completion fluids and materials), notably:
  • ISO 13503-1: measurement of viscous properties of completion fluids
  • ISO 13503-4: static leakoff testing procedures
  • ISO 13503-5: proppant conductivity testing

EN ISO 13503-6:2014 provides a reproducible, industry-recognized protocol for dynamic leakoff testing, making it essential for laboratories and operators focused on completion fluid performance and well integrity.