SIST EN ISO 14183:2009 PDF
Animal feeding stuffs - Determination of monensin, narasin and salinomycin contents - Liquid chromatographic method using post-column derivatization (ISO 14183:2005)
Animal feeding stuffs - Determination of monensin, narasin and salinomycin contents - Liquid chromatographic method using post-column derivatization (ISO 14183:2005)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 28
- Дата публикации:
- 25 февраля 2009 г.
- ICS:
- 65.120
- Технический комитет:
- KŽP - Agricultural food products
ISO 14183:2005 specifies a high-performance liquid chromatographic (HPLC) method for the determination of the monensin, narasin and salinomycin contents of animal feeding stuffs, supplements (dry and liquid) and mineral premixtures. The method is not applicable to drug premixes (pharmaceutical products). Lasalocid and semduramicin cannot be determined by this method. The limit of quantitation is approximately 1 mg/kg, 2 mg/kg and 2 mg/kg for monensin, salinomycin and narasin, respectively. A lower limit of quantitation can be achievable but this is to be validated by the user.
Abstract
Overview
EN ISO 14183:2008 (ISO 14183:2005) specifies a validated high-performance liquid chromatographic (HPLC) method for the determination of monensin, narasin and salinomycin in animal feeding stuffs, supplements (dry and liquid) and mineral premixtures. The method uses reverse‑phase HPLC with post‑column derivatization (vanillin) and spectrophotometric detection at 520 nm. It is not applicable to pharmaceutical drug premixes; lasalocid and semduramicin cannot be determined by this method.
Key topics and technical requirements
- Scope: Applicable to animal feeds, supplements and mineral premixtures; excludes drug premixes.
- Extraction: Methanol/water (90 + 10) with mechanical shaking for 1 hour, then filtration.
- Chromatography: Reverse‑phase HPLC with post‑column derivatization using vanillin (daily‑prepared reagent) and detection at 520 nm.
- Confirmation: Suspect trace positives or unexpected ionophores can be confirmed by hexane extraction or post‑column derivatization with dimethylaminobenzaldehyde (DMAB).
- Reference standards & preparation: Requires authenticated monensin, narasin and salinomycin standards; stock standards prepared in neutralized methanol for certain analytes (narasin). Concentrations and component composition must be recorded.
- Limits of quantitation (LOQ): Approximately 1 mg/kg for monensin and 2 mg/kg for salinomycin and narasin. Users may validate lower LOQs for their laboratory.
- Safety & quality: Use HPLC‑grade solvents, protect standards from light, handle toxic ionophore standards in a fume hood and follow appropriate PPE.
- Reference for sampling: ISO 6498:1998 (preparation of test samples) is a normative reference cited in the standard.
Applications and users
EN ISO 14183:2008 is intended for:
- Feed testing and analytical laboratories performing routine or regulatory analysis of ionophores in feeds.
- Quality control teams at feed manufacturers and premix producers monitoring monensin, narasin and salinomycin levels.
- Regulatory authorities and compliance labs verifying feed composition, safety and labeling claims.
Practical advantages include established extraction and HPLC confirmation procedures, defined LOQs, and guidance on standard preparation and detection-facilitating reproducible, comparable results across laboratories.
Related standards
- ISO 14183:2005 - original international text adopted as EN ISO 14183:2008.
- ISO 6498:1998 - preparation of test samples for animal feeding stuffs.
- CEN/TC 327 - European technical committee responsible for animal feeding stuffs methods.
Keywords: EN ISO 14183:2008, ISO 14183:2005, monensin, narasin, salinomycin, HPLC, post‑column derivatization, animal feeding stuffs, limit of quantitation.
Технические детали
- SKU
- SIST EN ISO 14183:2009
Похожие стандарты
Упомянутые в описании и другие стандарты SIST
ISO 14183:2005
ДействующийAnimal feeding stuffs — Determination of monensin, narasin and salinomycin contents — Liquid chromatographic…
Overview ISO 14183:2005 specifies a validated HPLC method for determining the contents of the ionophores monensin, narasin and salinomycin in animal feeding stuffs, feed supplements (dry and liquid)…
ISO 6498:1998
ОтменёнAnimal feeding stuffs — Preparation of test samples
SIST EN ISO 6338:2026
ДействующийMethod to calculate GHG emissions at LNG plant (ISO 6338:2023)
Overview SIST EN ISO 6338:2026 / ISO 6338:2023 establishes a standardized method for calculating greenhouse gas (GHG) emissions at liquefied natural gas (LNG) plants, both onshore and offshore. Devel…
SIST-TP CEN ISO/ASTM TR 52958:2026
Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…
Overview SIST-TP CEN ISO/ASTM TR 52958:2026 specifies a workflow for the detection of lack of fusion flaws during the additive manufacturing of metals using powder bed fusion-laser based (PBF-LB) pro…
SIST EN ISO 41002:2026
ДействующийFacility management - Development of the facility management organization (ISO 41002:2026)
Overview SIST EN ISO 41002:2026 - Facility management - Development of the facility management organization offers strategic guidance for building and developing robust facility management (FM) organ…
SIST EN ISO 844:2026
ДействующийRigid cellular plastics - Determination of compressive properties (ISO 844:2026)
Overview SIST EN ISO 844:2026 - Rigid Cellular Plastics: Determination of Compressive Properties (ISO 844:2026) provides standardized methods for measuring the compressive properties of rigid cellula…
SIST-TS CEN ISO/TS 17664-3:2026
ДействующийProcessing of health care products - Information to be provided by the medical device manufacturer for the pr…
Overview SIST-TS CEN ISO/TS 17664-3:2026 sets out comprehensive guidance for grouping reusable medical devices based on their cleaning requirements. This technical specification, prepared collaborati…
SIST EN ISO 8980-4:2026
ДействующийOphthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…
Overview SIST EN ISO 8980-4:2026 specifies requirements and test methods for the properties of anti-reflective coatings and hydrophobic coatings applied to uncut finished spectacle lenses. Developed…