Overview
EN ISO 16048:2003 - "Passivation of corrosion-resistant stainless‑steel fasteners" specifies the common chemical methods used to passivate stainless‑steel fasteners. The standard describes preparatory pickling steps, recommended passivation baths, and verification responsibilities. An informative annex illustrates typical anodic dissolution behaviour (active → passive → transpassive) to explain the metallurgical basis for passivation and passivity.
Key topics and requirements
- Scope: Methods most often used for passivation of corrosion‑resistant stainless‑steel fasteners.
- Preparation: Fasteners must be degreased and rinsed before pickling. For some hot‑forged grades, the standard requires soft annealing and shot‑peening prior to pickling to reduce hydrogen embrittlement risk.
- Pickling: ISO 16048 recommends specific pickling baths with defined acid types, concentration, temperature and exposure time ranges to remove scale and surface contamination before passivation.
- Passivation baths: Primary passivation treatments use nitric acid (HNO3) baths in prescribed concentration and temperature ranges. The standard also permits the use of nitric acid with sodium dichromate (Na2Cr2O7·2H2O) additions to minimize discoloration or etching on high‑carbon and free‑cutting stainless steels.
- Verification: There is no single referee test method defined in the standard; passivation effectiveness must be confirmed through the manufacturer’s quality assurance system and in accordance with customer or product requirements.
- Technical background: Annex A explains anodic dissolution and the transition between active, passive and transpassive regions - important for understanding why passivation improves corrosion resistance.
Practical applications
- Ensuring long‑term corrosion resistance of stainless‑steel bolts, nuts, screws, studs and similar fasteners used in automotive, marine, construction, petrochemical and food‑processing industries.
- Establishing process control for manufacturers and surface treatment suppliers who perform pickling and passivation.
- Informing procurement and quality teams on specification and acceptance criteria for purchased fasteners.
- Guiding corrosion engineers and maintenance teams when selecting treated fasteners for corrosive environments.
Who should use this standard
- Fastener manufacturers and heat‑treatment shops
- Surface treatment and passivation service providers
- Quality assurance and inspection teams in manufacturing and supply chains
- Engineers specifying corrosion‑resistant fasteners
Related standards
- ISO 3506 series (mechanical properties of corrosion‑resistant stainless‑steel fasteners): Part 1 (bolts, screws, studs), Part 2 (nuts), Part 3 (set screws). These are normative references within EN ISO 16048:2003.
Keywords: EN ISO 16048:2003, passivation, stainless‑steel fasteners, corrosion‑resistant, pickling, nitric acid, sodium dichromate, passivity, anodic dissolution, manufacturer quality assurance.