SIST EN ISO 16929:2021 PDF

Overview - EN ISO 16929:2021 (Plastics disintegration in pilot‑scale composting)

EN ISO 16929:2021 specifies a pilot‑scale test method to determine the degree of disintegration of plastic materials under defined aerobic composting conditions. It is intended as part of the overall evaluation of industrial compostability (see ISO 17088). The method assesses physical breakdown (disintegration) of plastics in a pilot composting environment and the influence of the test material on the composting process and final compost quality. It does not measure aerobic biodegradability.

Key topics and technical requirements

• Test scope: Pilot‑scale aerobic composting under defined and standardized conditions to promote natural self‑heating and microbial activity.
• Test materials and mixing: Test material is mixed with fresh biowaste at a defined concentration and introduced into bins or nets in pilot composting units.
• Minimum biowaste mass: The standard updated the minimum amount of biowaste used in a bin to 15 kg (from 30 kg) to reflect smaller composting bins.
• Process control and monitoring: Regular monitoring of temperature, pH, moisture and gas composition, with periodic turning and mixing to ensure appropriate composting conditions.
• Duration and end point: Composting is continued until a fully stabilized compost is obtained (commonly around 12 weeks).
• Assessment of disintegration: Final compost and residual test material are sieved (typically 2 mm and 10 mm meshes). Disintegration is evaluated by comparing the fraction of test material retained on the 2 mm sieve to the amount originally tested, using total dry solids basis.
• Compost maturity and quality checks: Maturity (e.g., “Rottegrad”) determined by self‑heating (Dewar) tests; compost may be further analysed for chemical contaminants and ecotoxicity. A separate temperature profile is included for tests that produce compost for ecotoxicity analysis (clause 6.2.2.3).
• Limitations: The method cannot be used to determine biodegradability; other standardized biodegradation tests exist.

Practical applications and users

• Manufacturers and designers of biodegradable/compostable plastics seeking evidence of disintegration under industrial composting conditions.
• Accredited test laboratories performing pilot‑scale compostability testing.
• Certification bodies and conformity assessors implementing ISO 17088 industrial compostability schemes.
• Waste management operators and compost producers evaluating the impact of novel plastics on composting processes and compost quality.
• Regulators and procurement teams specifying compostability performance for packaging and single‑use items.

Related standards (useful cross‑references)

• ISO 17088 - Specifications for industrial compostability claims.
• ISO 14851, ISO 14852, ISO 14855-1 and ISO 14855-2 - alternative methods for assessing biodegradability.

Keywords: EN ISO 16929:2021, plastics disintegration, pilot‑scale composting, industrial compostability, compostability testing, ISO 17088.