SIST EN ISO 16995:2015 PDF

Name: SIST EN ISO 16995:2015 — Solid biofuels - Determination of the water soluble content of chloride, sodium and potassium (ISO 16995:2015)
SKU: SIST EN ISO 16995:2015
Price: 60.09 EUR
Availability: InStock

Solid biofuels - Determination of the water soluble content of chloride, sodium and potassium (ISO 16995:2015)

Название (английский):

SIST EN ISO 16995:2015

Solid biofuels - Determination of the water soluble content of chloride, sodium and potassium (ISO 16995:2015)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 9 апреля 2015 г.
ICS:: 75.160.40
Технический комитет:: AGO - Refuse derived fuel

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 16995:2015 describes a method for the determination of the water soluble chloride, sodium and potassium content in solid biofuels by extraction with water in a closed container and their subsequent quantification by different analytical techniques.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 16995:2015 - Solid biofuels - Determination of the water soluble chloride, sodium and potassium content (ISO 16995:2015) describes a standardized laboratory method to extract and quantify the water‑soluble fractions of chloride, sodium and potassium from solid biofuels. The method uses a closed‑vessel water extraction (120 °C, 1 h) followed by analytical determination by ion chromatography, potentiometric titration, flame emission/absorption or ICP‑OES. The standard supersedes EN 15105:2011 and is intended for consistent, comparable biofuel testing across laboratories.

Key topics and technical requirements

Scope: Determines the amount extractable with water (water‑soluble chloride, Na, K) - not the total element content. Relevant to salt forms that are mobile and volatile during combustion.

Extraction procedure:

Sample: 1.0 g (nominal top size ≤ 1 mm, prepared per EN 14780).
Add 50.0 ml deionized water in a fluoropolymer vessel (≈100 ml) with tight cap.
Heat closed vessel at 120 ± 5 °C for 60 min, cool, dilute to 100 ml, filter (0.45 μm).

Analytical methods:

Chloride: Ion chromatography (IC) or potentiometric titration with AgNO3 (note: titration includes water‑soluble bromide and iodide).
Sodium & potassium: Flame emission spectroscopy (FES), flame atomic absorption spectrometry (FAAS) or ICP‑OES.

Apparatus & reagents: Oven/autoclave capable of 120 °C; fluoropolymer vessels resistant to ≥125 °C/232 kPa (borosilicate glass acceptable when testing chloride only); deionized water with negligible Cl/Na/K; balance with ≥1 mg resolution.

Quality elements: Concurrent moisture determination (ISO 18134‑3) when results are converted to other bases; blank tests, filtration, and reporting requirements. Performance characteristics and test report structure are specified.

Applications and users

Practical for: biofuel producers, independent testing laboratories, boiler and CHP plant operators, fuel traders, environmental regulators and researchers.

Use cases:

Assessing risk of corrosion, fouling and slagging in combustion systems.
Estimating volatile, aggressive fractions of Na and K that influence emissions and ash behavior.
Quality control and specification compliance for wood chips, pellets, straw and other solid biofuels.

Related standards

ISO 9964‑1/2/3 (Na/K determinations), ISO 10304‑1 (ion chromatography for anions), ISO 11885 (ICP‑OES), ISO 16559, ISO 16993, ISO 18134‑3 (moisture), EN 14780 (sample preparation), Std. Meth. 4500‑Cl‑D.

Keywords: EN ISO 16995:2015, solid biofuels, water soluble chloride, sodium and potassium determination, biofuel testing, ion chromatography, ICP‑OES, potentiometric titration, extraction 120 °C.

SIST EN ISO 16995:2015 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 16995:2015

Solid biofuels — Determination of the water soluble chloride, sodium and potassium content

BS EN ISO 18134-3:2023

Solid biofuels. Determination of moisture content. Moisture in general analysis sample.

SIST EN ISO 10304-1:2009/AC:2012

Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of…

SIST EN ISO 11885:2009

Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometr…

SIST EN ISO 16559:2022

Solid biofuels - Vocabulary (ISO 16559:2022)

SIST EN ISO 16993:2016

Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016)